Active Member
|
[China]
Address: Room#7B014, Lanxi Garden, No.8 xingShansi East Street, Xi'An City , P.R.China
Contact name:Felix MU
Xian Mager Machinery International Trade Co., Ltd. |
|
|
Tri-Dex Indexable End Mills
Features:
♦ Positive rake 90° right hand cut.
♦ Uses standard triangular inserts.
♦ Cutting rake angle 0°.
♦ Adaptable for N.C.Machining.
♦ Axial rake angle 0°.
♦ Setting angle 90°.
| Cutting Dia | Shank | No.Of Flute | Lead | Inserts Used |
| 1 | 3/4 | 1 | 15° | SPGN421 |
| 1 | R8 | 1 | SPGN421 | |
| 2 | 1 | 3 | SPGN421 | |
| 2 | R8 | 3 | SPGN421 | |
| 2 | 1-1/4 | 3 | SPGN421 | |
| 2-1/2 | R8 | 5 | SPGN421 | |
| 2-1/2 | 1-1/4 | 5 | SPGN421 | |
| 3 | R8 | 5 | SPGN421 | |
| 3 | 1-1/4 | 5 | SPGN421 | |
| 3/4 | 3/4 | 1 | 45° | SPGN421 |
| 1 | 3/4 | 1 | SPGN421 | |
| 1 | R8 | 1 | SPGN421 | |
| 1-1/4 | 3/4 | 1 | SPGN421 | |
| 1-1/4 | R8 | 1 | SPGN421 | |
| 1-1/2 | 3/4 | 1 | SPGN421 | |
| 1-1/2 | R8 | 1 | SPGN421 | |
| 2 | 3/4 | 3 | SPGN421 | |
| 2 | R8 | 3 | SPGN421 | |
| 2 | 1-1/4 | 3 | SPGN421 | |
| 2-1/2 | R8 | 4 | SPGN421 | |
| 3 | R8 | 5 | SPGN421 | |
| 3 | 1-1/4 | 5 | SPGN421 |
90°End Mills
| Shank | Cutting Dia | No.Of Inserts | Inserts used |
| 1/2(Weldon) | 1/2 | 1 | TPG-22 |
| 3/4(Weldon) | 3/4 | 1 | TPG-32 |
| 3/4 | 2 | TPG-22 | |
| 7/8 | 2 | TPG-22 | |
| 1 | 2 | TPG-22 | |
| 1-1/4 | 2 | TPG-32 | |
| 1-1/2 | 3 | TPG-32 | |
| 1-3/4 | 3 | TPG-32 | |
| 2 | 3 | TPG-32 | |
| 1"(Weldon) | 1 | 2 | TPG-22 |
| 1-1/4 | 2 | TPG-22 | |
| 1-1/2 | 3 | TPG-32 | |
| 1-3/4 | 3 | TPG-32 | |
| 2 | 3 | TPG-32 | |
| 30STD | 2 | 3 | TPG-32 |
| 40STD | 2 | 3 | TPG-32 |
| 2-1/2 | 4 | TPG-32 | |
| 3 | 5 | TPG-32 | |
| R8 Bridgeport Type | 1 | 2 | TPG-22 |
| 1-1/4 | 2 | TPG-32 | |
| 1-3/8 | 2 | TPG-32 | |
| 1-1/2 | 3 | TPG-32 | |
| 1-5/8 | 3 | TPG-32 | |
| 1-3/4 | 3 | TPG-32 | |
| 2 | 3 | TPG-32 | |
| 2-1/2 | 4 | TPG-32 | |
| 2-3/4 | 5 | TPG-32 | |
| 3 | 5 | TPG-32 | |
| 3-1/2 | 6 | TPG-32 | |
| 4 | 6 | TPG-32 |
