|
[China]
Trade Verify
Address: South Geng Industrial Zone, Huicheng Street, Xinhui District, Jiangmen City
Contact name:Kwan
Jiangmen Boke Industrial Co., Ltd |
|
Verified Suppliers
|
|
|
10S40 Polishing Wheel 150/130mm For The Straight Edge Machine Glass Processing Tools
10S series polishing wheel
Size: 150x40x70 130x35x60
Application: for bottom edge polishing on straight edge machines,
bilateral machines
Performance description: 10S polishing series - for polishing the
bottom edge and 45 degree chamfering of glass on straight edge
machines. It can also be used for the fine polishing of bevelled
edges of glass and can replace the imported 10S series and BK
series.
When this product is used for straight bevelling machines, the
front process must be combined with diamond wheels and resin
wheels, and the back process must be combined with wool wheels.
Note: Coolant must be used for this product. Please use at high
line speeds of 30m/s.
Characteristics: This product is available in 40/60/80/120 mesh,
the different mesh sizes are different in terms of the coarseness
and precision of the grinding wheel grit, the smaller the mesh the
larger the grit size, the sharper the grinding wheel, and the
corresponding brightness is not as bright as the larger mesh. The
larger the relative mesh, the smaller the grit size, the shinier
the grinding wheel, the relative sharpness is not as good as the
former.
10S40 Polishing Wheel 150/130mm For The Straight Edge Machine Glass Processing Tools
| Name | 10S polishing wheel | |
| Size | 150*70*30/40 | 130*60*35 |
| Grits | #40, #60, #80 | |
| Machine | Double-edge and straight-edge machines | |
10S polishing wheel, also known as a water pine wheel, is made of
rubber and abrasive material and has a certain elasticity, with a
fine grinding force, which can trim the slight texture and at the
same time achieve a certain polishing effect; it is often used in a
polishing light process after finishing the grinding wheel.
The 10S is suitable for use on glass bilateral grinding machines
for bottom edge polishing and can be used at running speeds of up
to 8 m/min for glass processing with a polish of over 7 Gs if a
diamond resin wheel is used in the front station, and is an ideal
alternative to the 10S series or the BK series if you wish to
maintain polishability while increasing running speed. Operating
speed up to 2800 rpm.
polishing effect
