105w 4000rpm 8 Poles Brushless DC Motor 3 phase feedback mechanisms

4000rpm 24v 77.5W 42mm bldc motor with driver kit

motores paso a pas
1.Introduction of 4000 bldc motor:

Brushless DC motor itself is the electromechanical energy conversion part, it in addition to the motor armature, permanent magnet excitation two parts, but also with a sensor. The motor itself is the core of brushless DC motor, which not only relates to performance index, noise and vibration, reliability and service life, but also involves manufacturing cost and product cost. By adopting permanent magnetic field, the brushless DC motor can get rid of the traditional design and structure of the general DC motor, which can meet the requirements of various application markets, and develop towards the direction of saving copper and materials, and making it easy.

2. Specification of JK42 BLDC MOTOR:

42mm bldc motor matching bldc Driver: JKBLD120

 
4.Dimensions of 3 phase brushless dc motor: (Unit=mm)

5.Advantages of 105w bldc motors:

A BLDC motor with three coils on the stator will have six electrical wires (two to each coil) extending from these coils. In most implementations three of these wires will be connected internally, with the three remaining wires extending from the motor body (in contrast to the two wires extending from the brushed motor described earlier). Wiring in the BLDC motor case is more complicated than simply connecting the power cell’s positive and negative terminals; we will look more closely at how these motors work in the second session of this series. Below, we conclude by looking at the advantages of by BLDC motors.

One big advantage is efficiency, as these motors can control continuously at maximum rotational force (torque). Brushed motors, in contrast, reach maximum torque at only certain points in the rotation. For a brushed motor to deliver the same torque as a brushless model, it would need to use larger magnets. This is why even small BLDC motors can deliver considerable power.

The second big advantage—related to the first—is controllability. BLDC motors can be controlled, using feedback mechanisms, to delivery precisely the desired torque and rotation speed. Precision control in turn reduces energy consumption and heat generation, and—in cases where motors are battery powered—lengthens the battery life.

BLDC motors also offer high durability and low electric noise generation, thanks to the lack of brushes. With brushed motors, the brushes and commutator wear down as a result of continuous moving contact, and also produce sparks where contact is made. Electrical noise, in particular, is the result of the strong sparks that tend to occur at the areas where the brushes pass over the gaps in the commutator. This is why BLDC motors are often considered preferable in applications where it is important to avoid electrical noise.

6.Applications of motor brushless :

BLDC Motor are widely used in devices that run continuously. They have long been used in washing machines, air conditioners, and other consumer electronics; and more recently, they are appearing in fans, where their high efficiency has contributed to a significant reduction in power consumption.

They are also being used to drive vacuum machines. In one case, a change in the control program resulted in a large jump in rotational speed—an example of the superlative controllability offered by these motors.

BLDC motors are also being used to spin hard disc drives, where their durability keeps the drives operating dependably over the long term, while their power efficiency contributes to energy reduction in an area where this is becoming increasingly important.