Home Companies CHANGZHOU JKONGMOTOR CO.,LTD

JKD2060AC Nema 34 Stepper Motor Controller 2 Phase 24V~90VDC 0A-7.2A

Contact Us

[China]

Trade Verify

Address: Building A2,Hutang Industrial zone,Lingdao Rd,Wujin District,Changzhou,China.Zip:213162

Contact name:Annie

CHANGZHOU JKONGMOTOR CO.,LTD

Verified Suppliers
  • Trust
    Seal
  • Verified
    Supplier
  • Credit
    Check
  • Capability
    Assessment

JKD2060AC Nema 34 Stepper Motor Controller 2 Phase 24V~90VDC 0A-7.2A

Country/Region china
City & Province changzhou jiangsu
Categories Fuse Components

Product Details

 

24V~90VDC 0A-7.2A Stepper Motor Controller JKD2060AC For Nema34 Stepping Motor

 

Descriptions
JKD2060AC is a new generation digital 2- phase stepper motor driver, based on a 32-bit DSP processor, combination of the anti-resonance, low noise, micro-step and low temperature rise technology significantly improve the performance of the stepper motor, has low noise, small vibration, low temperature rise and high-speed torque. The driver use online adaptive PID technology, without manual adjustment can be automatically generated optimal parameters for different motors, and achieve the best performance.

 

Supply voltage range from 20VAC to 60VAC or from 24VDC to 90VDC, suitable for driving various 2-phase hybrid stepping motors which phase current below 7.2A. The microstep can be set from full step to 51200steps/rev and the output current can be set form 2.4A to 7.2A; with automatic idle-current reduction, self-test, overvoltage, under-voltage and over-current protection.

 

Features

  • High-performance, low price
  • micro-step
  • Automatic idle-current reduction
  • Optical isolating signals I/O
  • Max response frequency up to 200Kpps
  • Low temperature rise, smooth motion
  • Online adaptive PID technology

 

Applications
Suitable for a variety of large-scale automation equipments and instruments. For example: labeling machine, cutting machine, packaging machine, plotter, engraving machine, CNC machine tools and so on. It always performs well when applied for equipment which requires for low-vibration, low-noise, high-precision and high-velocity.

 

 

Electrical Specifications

 

 ParameterMinTypicalMaxUnit
 Input Voltage(DC)24-90VDC
 Input Voltage(AC)20-60VAC
 Output current0-7.2A
 Pulse Signal Frequency0-200KHZ
 Logic Signal Current71016MA

 

 

Current setting

RMSPeakSW1SW2SW3
2.00A2.40Aononon
2.57A3.08Aoffonon
3.14A3.77Aonoffon
3.71A4.45Aoffoffon
4.28A5.14Aononoff
4.86A5.83Aoffonoff
5.43A6.52Aonoffoff
6.00A7.20Aoffoffoff

 

Standstill Current Setting

SW4 is used for standstill current setting. OFF meaning that the standstill current is half of the dynamic current; and ON meaning that standstill current is the same as the selected dynamic current. Usually the SW4 is set to OFF, in order to reduce the heat of the motor and driver.

 

Microstep Setting

Step/RevSW7SW8SW9SW10
Defaultonononon
800offononon
1600onoffonon
3200offoffonon
6400ononoffon
12800offonoffon
25600onoffoffon
51200offoffoffon
1000onononoff
2000offononoff
4000onoffonoff
5000offoffonoff
8000ononoffoff
10000offonoffoff
20000onoffoffoff
40000offoffoffoff
40000offoffoffoff

 

Control signal Connector

Control Signal connector
NameDescription
PUL+Pulse signal positive
PUL-Pulse signal negative
DIR+Direction signal positive
DIR-Direction signal negative
ENA+Enable signal positive, usually left unconnected(enable)
ENA-Enable signal negative, usually left unconnected(enable)

 

Power and Motor Connector

AC

Power supply

 

+24~+90 VDC or 20V-60VAC

AC
A+

 

Motor phase A

A-
B+

 

Motor phase B

B-

 

Control Signal Connector Interface

Hot Products

NEMA23 Hybrid Stepper Motor IP65 Dustproof And Waterproof 2Phase Holding Torque 0.55N.m 1.8 Degree ...
Permanent magnet stepper motor with gearbox 42BY12/40JB4K ratio10 12V 7.5degree Low cost, high ...
2phase Hybrid stepper motor60BYGH401-03 double shaft 4N.m 1.8 step angle for cnc machnine Genaral ...
Nema 23 Stepper Motor 57mm 2304HS42D8-2 For N95 Mask Machine General Specification of nema 23 ...
High Torque 12 Nm current 6A Nema 34 CNC Stepper Motor for CNC kit machine Genaral Specification of ...
High Torque Stepper Motor 20Nm NEMA 42 Stepping Motor With Drive Kit For CNC Machine Details of nema ...