Active Member
|
[China]
Address: Chengchang Industrial Park,Huangtu Town,Jiangyin City,Jiangsu Province,China
Contact name:Antonio Zhou
Jiangsu Liangyi Co.,Limited |
|
We are professional Incoloy 800HT Forged Forging Rings Rolled Rings(UNS N08811,1.4959,Alloy 800HT) factory from china
Incoloy 800HT Chemical composition:
Alloy | % | Ni | Cr | Fe | C | Mn | Si | Cu | S | Al | Ti |
800HT | Min. | 30 | 19 |
balance | 0.05 |
|
|
|
| 0.15 | 0.15 |
| Max. | 35 | 23 |
| 0.10 | 1.5 | 1 | 0.75 | 0.015 | 0.60 | 0.60 |
Incoloy 800HT Physical properties:
Density | 8.0 g/cm³ |
Melting point | 1350-1400℃ |
Incoloy 800HT Alloy m inimum mechanical properties in the room temperature
Alloy | Tensile strength Rm N/mm² | Yield strength RP0. 2 N/mm² | Elongation A5 % |
800H | 500 | 210 | 35 |
800H Characteristic as below:
1.Excellent corrosion resistance in the high temperature at 500℃ in
the water medium.
2.Good stress corrosion resistance property.
3.Excellent machining
Incoloy 800HT Metallurgical structure:
800H is face-centered cubic lattice structure. very low carbon
centent and increased Ti:C rate
improve the stability of the structure, anti-allergy , and
anti-intergranular corrosion. Low temperature annealing of 950℃
ensure the fine grain structure.
Incoloy 800HT Corrosion resistance:
800H can not be corroded in many kinds of media. Its high nickel
content made it have good stress corrosion resistance cracking
property in the water corrosion condition.High Chromium content
made it can better resist pitting and crevice corrosion cracking.
This alloy can resist nitric acid and organic acid corrosion, but
it is not so fine in the sulfuric acid and hydrochloric acid.
800H not only good corrosion resistance in both oxidation and
non-oxidizing salt, maybe a little pitting in halide, but also very
good corrosion resistance property in the mixture of water,smoke,
steam,air and carbon dioxide.
Incoloy 800HT Application range and field:
1.Nitrate condenser---Corrosion resistance of nitrc acid
2.Steam heating pipes--Very good mechanical property
3.Heat up element tube--Very good mechanical property
For the application of up to 500℃ enviornment, alloy supply state
change to annealing.
Name & Description | Forging Handling Capacities | Quantity |
3150 Tons Free Forging Hydraulic Press | Max. Single Forging in 28 Tons | 1 |
5000mm Diameter Rolling Forging Machine | Max. Single Forging in 16 Tons | 1 |
8 Tons Free Forging Hummer | Max. Single Forging in 7.5 Tons | 1 |
6 Tons Free Forging Hummer | Max. Single Forging in 5.5 Tons | 1 |
5 Tons Free Forging Hummer | Max. Single Forging in 4.5 Tons | 1 |
60 Tons Forging Handling Operator | Max. Single Forging in 45 Tons | 1 |
10 Tons Forging Handling Operator | Max. Single Forging in 7.5 Tons | 1 |
80 Tons Crane | Max. Single Ingot in 80 Tons | 1 |
60/30 Tons Crane | Max. Single Ingot in 60 Tons | 1 |
30/10 Tons Crane | 30/10 Tons | 4 |
Trolley Heat Furnace | 5000*1500*1200 mm | 3 |
Trolley Heat Furnace |
