Active Member
|
[China]
Address: Chengchang Industrial Park,Huangtu Town,Jiangyin City,Jiangsu Province,China
Contact name:Antonio Zhou
Jiangsu Liangyi Co.,Limited |
|
We are professional Copper Bronze Alloy UNS C63200+SA266 Gr4/Gr2 Clad/Cladding Tube Sheets(Tubesheets) factory from china
UNS C63200 nickel aluminum bronze alloy has moderate strength and corrosion resistance. The following datasheet provides an overview of UNS C63200 alloy.
The chemical composition of UNS C63200 nickel aluminum bronze alloy is outlined in the following table.
| Element | Content (%) |
|---|---|
| Cu | 82 |
| Fe | 4 |
| Al | 9 |
| Ni | 5 |
The following table shows the physical properties of UNS C63200 nickel aluminum bronze alloy.
| Properties | Metric | Imperial |
|---|---|---|
| Density | 7.64 g/cm³ | 0.276 lb/in³ |
| Melting point | 1046°C | 1905°F |
The mechanical properties of UNS C63200 nickel aluminum bronze alloy are displayed in the following table.
| Properties | Metric | Imperial |
|---|---|---|
| Hardness, Rockwell B | 92.0-97.0 | 92.0-97.0 |
| Tensile strength, (depending on amount of cold work or heat treatment) | 640-725 MPa | 92800-105000 psi |
| Yield strength (depending on amount of cold work or heat treatment) | 330-380 MPa | 47900-55100 psi |
| Elongation at break (in 50 mm, 18% reduction in area) | 18% | 18% |
| Compressive strength | 760 MPa | 110000 psi |
| Charpy impact (V-notch) (@ -29-20°C/-20.2-68°F) | 23.0-27.0 J | 17.0-19.9 ft-lb |
| Izod Impact (@ -29-20°C/-20.2-68°F) | 13.0-16.0 J | 9.59-11.8 ft-lb |
| Machinability (based on 100 machinability for UNS C360000) | 30 | 30 |
| Shear modulus | 44 GPa | 6380 ksi |
| Poisson's ratio | 0.34 | 0.34 |
| Elastic modulus | 117 GPa | 16969 ksi |
Forged ratio: |
no less than 4:1
|
Technical Data: |
According to the customer's requirement of Chemical Composition, Physical Properties and Mechanical Testing
|
Test: |
Ultrasonic test according to SEP 1921-84 G3 C/c
|
Certificate of Quality |
in addition the normal terms, production process, the mechanical property forged ratio, UT test result, Grain size, heat treatment methods and the sample of is shown on the Certificate of Quality
|
Marking: |
Grade, heat NO. length will be stamped one each bar with required color
|
Payment: |
30% advance by TT; Balance pay before the shipment against shipping documents or irrevocable LC at sight
|
|
|
Name & Description | Forging Handling Capacities | Quantity |
3150 Tons Free Forging Hydraulic Press | Max. Single Forging in 28 Tons | 1 |
5000mm Diameter Rolling Forging Machine | Max. Single Forging in 16 Tons | 1 |
8 Tons Free Forging Hummer | Max. Single Forging in 7.5 Tons | 1 |
6 Tons Free Forging Hummer | Max. Single Forging in 5.5 Tons | 1 |
5 Tons Free Forging Hummer | Max. Single Forging in 4.5 Tons | 1 |
60 Tons Forging Handling Operator | Max. Single Forging in 45 Tons | 1 |
10 Tons Forging Handling Operator | Max. Single Forging in 7.5 Tons | 1 |
80 Tons Crane | Max. Single Ingot in 80 Tons | 1 |
60/30 Tons Crane | Max. Single Ingot in 60 Tons | 1 |
30/10 Tons Crane | 30/10 Tons | 4 |
Trolley Heat Furnace | 5000*1500*1200 mm | 3 |
Trolley Heat Furnace | 8000*2000*1600 mm | 3 |
Trolley Heat Furnace |
