JIU TECH Enterprise Co., Ltd |
Verified Suppliers
|
|
Introduction:Mitsubish MUT-3 Diagnostic Scanner
Price:Best Price
In accordance with releasing new products that introduce CAN
communications
systems, MMC has developed the MUT-III as a next generation
diagnosis tester
for servicing these new and future vehicles.
A personal computer (PC) is connected to the MUTIII unit and used
as a systems
control terminal, and communicates with a vehicle ECU through the
VCI. In addition
to being able to handle all diagnosis functions covered by the
conventional MUT-II
tester, the MUT-III system can display data as easy-to-understand
diagrams and
graphs on a large screen of the PC. Unlike the MUT-II, the MUT-III
can retain data
on all vehicles, from old to new models, classified according to
destination in the
PC s hard disk. This eliminates the awkward but essential job with
the MUT-II, of
switching the data list (communications protocol data and diagnosis
item list data
-base) by replacing the ROM pack with another according to the
vehicle model and
year model.
New functions that make use of the advantages of the PC are also
being developed.
For example, the workshop manual viewer is a useful function for
mechanics as they
no longer have to carry around a thick manual and search for
relevant pages while
working on a vehicle. The workshop manual viewer is currently
available for certain
vehicle models, and allows users to retrieve the pages containing
the failure code
for a particular problem at the push of a button.
Software Supported Languages:
English, Czech, French, German, Greek, Italian, Spanish, Turkish
Supported Cars:
Mitsubishi
Set Includes:
Vehicle Communication Interface (VCI) (MB991824) (1 pc)
A communication interface used to connect the vehicle
ECUs and the PC.
1. When connected with the PC
- Vehicle diagnosis (Interactive fault diagnosis)
- SWS communication; CAN communication support
- Drive recorder
- ECU reprogramming
- Volt, Ohm, measurement
- Fuel pressure measurement (not available in US)
2. When used with the VCI unit (disconnected from PC)
- VCI Stand-alone diagnosis
- Drive recorder
- ECU reprogramming
- Volt, Ohm measurement
- Belt tension measurement
Memory Card
Stores data for ECU reprogramming, drive recorder, etc. This is a
standard,
off-the-shelf memory card. The one provided (with reprogramming
data) is
a Compact Flash memory card (MB991853) inserted into the CF card
adapter
(MB991939).
MUT-3 Main Hardness A (MB991910)
Used when connecting the VCI with vehicles that has only one 16-pin
diagnosis
connector.
- Supports fault diagnosis and ECU updating on the above-described
vehicles
- Supports the CAN communication system
MUT-3 Main Harness B (MB991911)
Used when connecting VCI with vehicles that has a 16-pin + 12-pin
or 16-pin
+ 13-pin diagnosis connector.
For models equipped with only 12-pin (or 12-pin + 12-pin) diagnosis
connector,
connect the MUT-2 adapter harness (MB991498) to the end of this
harness in the
same as MUT-2, and power is supplied from the cigarette lighter
socket.