JIU TECH Enterprise Co., Ltd |
Verified Suppliers
|
|
Ignition Coil Tester
Ignition Coil Tester
Description:
Applicable on coil-on-plug (COP), coil-near- plug (CNP), double
ended coil-on-plug(DECOP) or wasted plug systems.
Simple operation:
Connect power from 12Volts car battery and the power LED will light
up.
Insert the yellow banana plug to the yellow socket and connect the
cable to the control terminal of the ignition coil.
Hook up the spark tester to the ignition coil.
Turn ON the frequency knob and adjust the frequency from low to
high (clockwise).
Turn back to low frequency and observe the spark color which should
be bluish purple.
Increase the frequency gradually and observe the spark line.
It should be in a straight line when NORMAL. If the spark line is
curved, it indicates that the coil is aging or there is an internal
leakage.
Turn to maximum frequency until the coil is slightly warm, then
turn down the frequency and observe the spark line
whether it is continuous or intermittent. If arcing sound is
heard but no spark indicates that there is internal leakage.
Use Ignition Leak Checker to detect the source of the leak
Package list:
1x Main Spark generator unit
2x Spark Tester
2x Extension probes (red & black each one unit)
1x Ignition Leak Checker
4x Extension cable (red, blue, green & black each one unit)
2x Crocodile Clip (red & black one each)
4x 3mm Female socket cable
2x 5mm Female socket cable
1x Carry case