JIU TECH Enterprise Co., Ltd |
Verified Suppliers
|
|
Detroit Diesel Software Heavy Duty Truck Diagnostic Scanner , Ddrs 7.09
quick details
Region: All regions
Languages: English
OS: WinXP
Quantity of CD: 1 DVD
Introducing DDRS 7.09 basic features – This application is the
electronic tool for servicing Detroit Diesel’s EPA07, EPA10, and
GHG14 equipped engines (S-60, MBE4000, MBE900, DD13, DD15, and
DD16). Note: It is not backward compatible with earlier versions of
Detroit Diesel electronic systems. Those systems will continue to
be serviced with DRS 6.23.The DDEC VI electronics system contains
two controllers, the MCM (Motor Control Module) and the CPC (Common
Powertrain Controller). The DDEC10 system includes the MCM2+, CPC2+
and ACM2 (After treatment Control Module). The GHG14 system
includes the MCM2.1, CPC4, ACM2.1, and TCM (Transmission Control
Module). DDRS 7.09 allows the user to perform the following
standard operations on both engine platforms:
1- Perform Standard Fault Code Operations
2- Links to Traditional and Advanced Troubleshooting Information
3- Read Actual Values
4- Configure and Manage Parameters
5- Perform Service Routines
6- Playback Logs of All Connected Activity
7- Automatic Software Updates from our server
II - Software Enhancements
Active faults can now be moved to the top of each channel ECM
listing
Fuel Injection System (FIS) fuel filter panel added
Transmission Control Module (TCM) instrument panel: TCM learned
values
TCM clear checksum fault dialog
Detroit Transmission dynamometer mode dialog
TCM clutch apply leak test
TCM shift abort counter
Variable Speed Fan Control
Parameter tab for Green House Gas (GHG) emission parameters
Generic scan tool support
DDRS Component Minimum
Windows XP, Windows Vista or Windows 7 (32bit & 64 bit)
1.8 Ghz processor
1.0 GB RAM
40 Gigabyte Hard drive with 20 Gigabyte free
32x CD ROM Drive
Monitor and graphics card supporting 1024 x 768 resolution and
16-bit color
1 free USB port
Internet or Mainframe Connection to DDC Server (for updates)
Translator box / cables requirements - Here are some key general
points to remember when connecting to the MCM and CPC with DDRS
7.09:
1 - For DDRS 7.09 the only translator box supported is the Nexiq
USB Link (P/N 125032) Translators that support only J-1708
communications like the Nexiq Lite-link and Detroit Diesel’s white
translator will not work with DDRS 7.09 under any circumstances.
2 - All 2007 vehicles contain a 9-pin Deutsch connector wired to
support both J-1939
/ CAN communications and J-1708 communications.
3 - All operations may be carried out on a vehicle that has both
the MCM and CPC properly installed. Note: There must be a CPC
physically present on the vehicle in order for communications to be
established with the MCM.
4 - When plugging into the 9 pin Deutsch connector on the vehicle
you must use a mating 9-pin connector fully wired to support J-1939
/ CAN communications. The old style 6 to 9-pin Deutsch adapter will
not work.
5 - Diagnostic adapters that will work with the DDEC VI system
include P/N 405048 (6 and 9-pin “Y” adapter) and P/N J-46931, the
J1939 9-pin Deutsch Connector that was part of the DDEC V
programming station upgrade kit.
Installing DDRS 7.09 –
Note: Before installing DDRS 7.09 you must remove any version of
Detroit Diesel’s software to minimize the chance of any conflicts
with older versions of the software. Please use the Windows Control
Panel’s “Add / Remove Software” option to perform this operation.
In order for DDRS 7.09 to work on a PC with the proper hardware and
operating system specifications other programs must also be
installed. They are:
1 - Microsoft Windows Installer 3.1 or higher
2 - Microsoft .Net Framework 3.5 SP1
3 - Lizardtech DjVu Control
4 - Proper drivers for your translator box hardware