Active Member
|
[China]
Address: 6/F Building C, Fuzhen Industrial Park, Changfeng Road, Changzhen Village, Gongming Street, Guangming new district, Shenzhen, China
Contact name:Jude
Shenzhen Jinhe Optoelectronics Technology Co.,Ltd |
|
|
High Resolution White Single Color LED Module CE ROHS Certification
| Item | P10 single White |
| Model Number | p10 |
| Pixel Pitch | 10mm |
| Pixel Density(dots/m²) | 10000 |
| Pixel Configuration | 1W |
| LED Type | Epistar |
| Module size(mm) | 320*160 |
| Module Resolution(dots) | 32*16 |
| Min.Viewing Distance(m) | ≥10 |
| Brightness(cd/m²) | ≥2000 |
| Viewing Angle(degree) | ≤120° |
| Average Power Consumption(w/m²) | 200 |
| Scan Mode | 1/4 |
| Protection Level | IP65 |
| Cabinet Size(mm) | 960*960 |
| Color Temperature | The brightness of R.G.B.is adjustable according to software 100level;Color temperature is adjustable in terms of detailed requirements |
| Input Voltage | AC220 V/50HZ or AC 110V/60HZ |
| Refresh Rate | LED screen refresh frame frequency recommended is no less than 1200HZ(recommended) |
| Color | 64g color(on the condition of 4096 gray scale) |
| Horizontal/Vertical viewing angle | <120° |
| Gray Scale | Recommended 14BIT |
| Effective Communication Distance(without relay) | Unshielded twisted-pair net line transmission distance is 100 meters,max transmission distance is 130 meters. |
Important Knowledge of Led display
1. What is LED?
LED is sanded for Light Emitting Diode, a kind of semiconductor
which is used to give and receive the electronic signal into
infrared rays or light, using the characteristics of compound
semiconductor. This is used for household appliances, remote
controller, electric bulletin board, various kinds of automation
appliances.
2. What are Pixel Pitch, Pixel Density, LED QTY, and Pixel
Configuration?
Pixel Pitch is the distance between neighboring pixels.
Pixel Density is the quantity of pixels per square meter.
LED QTY is the quantity of LED lamps per square.
Pixel Configuration is the description of the consistence of a pixel, for instance, we
use 1 red lamp, 1 green lamp, and 1 blue lamp to compose a pixel,
the pixel configuration is 1R1G1B.
3. What are LED Type, Module size and Module resolution?
LED Type is the description of LED lamp, for instance, the brand, the shape
in physical, the size of the lamp, etc.
Module size is the measurement of a module.
Module resolution is the number of pixels per module.
4. What is Drive Method, driving IC and Power supply
Drive Method: always we use static, 1/4 scan, 1/8 scan, 1/16 scan, the latter
one contributes to less brightness than the former. We always use
the static outdoor, and use the different kinds of scan indoor.
Driving IC is the generic term for several kinds of IC, that are used to
control the LED lamps, and as a bridge between the control system
and lamps.
Power supply: a kind of device that used as a transfer from 220V AC into 5V DC.
It always seems like a box in the cabinet.
5. What is viewing angle?
Viewing angle is the maximum angle at which a display can be viewed with
acceptable visual performance. It includes horizontal viewing angle
and vertical viewing angle.
Basic promise from Jinhe:
A: Full automatic production to control our high quality, best
color consistency and get better performance.
B: Energy saving, low power consumption and long lifespan 100,000
hours (about 10 years).
C: We guarantee that the equipment we provide are brand new,
complete and unused.
D: Good heat dissipation capability and high waterproof because of
the unique design of vent fan (like shutter).
E: Our quality control throughout every process from
materials-production- test-package-delivery
After sale service:
1) Guidance service: We can guide on line if customers have questions about the installation and usage.
For large project, we provide your engineer a week free training, or if customer could bear the relevant cost, our engineer can go to customer’s country for on-site guidance.
2) Warranty period: 2 years after shipment.
3) Maintenance principles: response in time, solve problems as soon as possible and ensure the use.
4) Maintenance terms: In the Maintenance period, free of all maintenance charges. Under normal use and storage, our company will be responsible for the equipments. If there is any failure in product quality, our company will maintain and change the components for free.After Maintenance period, only charge the material costs free of manual work fees.
