Steel Alloy Jewelry Accessories Tools Rectangle Tungsten Carbide Draw Plate

Rectangle Shape Tungsten Carbide Wire Drawplate Jewelry Making Tool

Product Name: rectangular drawing board

Product material: high quality tungsten gold

Product specification: 0.55-3.00mm/3.10-5.00mm

Drawing board is also called (drawing board and drawing board)

It is suitable for drawing all kinds of precious metals, such as gold wire, silver wire, copper wire, platinum wire, palladium wire, etc.. The drawing hole of this drawing plate is made of high-quality metal tungsten steel alloy, and its service life is longer. Compared with other wire plates, its advantage is that the drawn wire is more delicate and smooth. It is a good helper for handcraft. According to your own needs, you can draw various sizes of wire.

Focus on Quality:

1. The drawing board can check whether the hole is damaged after receiving the goods. If the drawing plate is not inspected or damaged by itself, it is not supported to return the product after use.

2. Before shooting, please confirm whether you can skillfully use it again. For those who say that it can't be pulled or has scratches, it is purely personal operation skill, and no return is allowed!

3. The arrangement of each line in the middle of the drawing board is not necessarily neat and neat, which does not affect the use. It is required to arrange neatly and carefully. Thank you!!!

4. The most important point to repeat: there is a deviation of about 0.05-0.35mm on each drawing board. Please know before placing an order. Thank you

Matters needing attention:

Melt the silver and cut it off with scissors. Before drawing, the silver wire to be drawn should be repeatedly hammered, Quenched and cooled. When the silver wire is hammered to the appropriate hole size, the silver wire head needs to be quenched with the hammer tip to extend through the smaller drawing hole. The drawing plate can be placed under the feet and some oil can be put on the drawing plate hole, Pull out the negative force with both hands with wire drawing flat nose pliers. Every two silver wires are annealed once, and then the smaller drawing holes are replaced by repeated annealing. If the wire is pulled below 1.0 mm, it can be directly drawn to the appropriate thickness without annealing. If you want to pull too thick silver wire, you should use the machine - hand pulling machine or electric tablet press machine, large wire drawing machine, etc. It can't be pulled by hand.

FAQ

1. who are we?

We are based in FuJian, China, start from 2012,sell to North America(50.00%),Domestic Market(30.00%),Mid East(20.00%). There are total about 11-50 people in our office.

2. how can we guarantee quality?

Always a pre-production sample before mass production;

Always final Inspection before shipment;

3.what can you buy from us?

Ring measuring tool,Diamond testing equipment,Jewelry equipment tools,electrical tools,Measuring tools

4. why should you buy from us not from other suppliers?

We are a company specializing in the production and processing of products and have a complete and scientific quality management system. Integrity, strength and product quality have been recognized by the industry.

5. what services can we provide?

Accepted Delivery Terms: null；

Accepted Payment Currency:USD,EUR,HKD,CNY;

Accepted Payment Type: null;

Language Spoken:English,Chinese