Active Member
|
[China]
Address: #1318-19,13/F, Hollywood Plaza, 610 Nathan Road, Mongkok, Kowloon, Hong Kong, China
Contact name:Lin
Shenzhen Jetacon Technology Limited |
|
|
Large setting range
Simple to mount
High switching performance
Wide adjustment range
Color coded temperature dials
35mm DIN rail mountable
KTO011: Thermostat (normally closed); for regulating heaters.
KTS011: Thermostat (normally open); for regulating of filter fans and heat
exchangers
or for switching signal devised when temperature limit has been
exceeded.
Heaters and cooling equipment can be switched independently from each other
with a temperature offset as opposed to the usual change-over contacts.
ZR011 : Dual Thermostat, NC and NO ( Normal closed and Normall open ) in one case
MFR 012: Mechanical Hygrostat 35 to 95% RH
Switch temperature difference 7K (± 4K tolerance)
Sensor element thermostatic bimetal
Contact type snap-action contact
Service life > 100,000 cycles
Max. Switching capacity : 250VAC, 10 (2) A 120VAC, 15 (2) A DC 30W
Connection
2-pole terminal, clamping torque 0.5Nm max.: rigid wire 2.5mm²
stranded wire (with wire end ferrule) 1.5mm²
Mounting: clip for 35mm DIN rail, EN60715 (or for exit filter EF 118 Series)
Casing: plastic according to UL94 V-0, light grey
Dimensions 60 x 33 x 43mm
Weight approx. 40g
Fitting position variable
Operating / Storage temperature -45 to +80°C (-49 to +176°F)
Operating / Storage humidity max. 90 % RH (non-condensing)
Protection type IP20
