Technical specifications | |
Model | CPU224 DC/DC/DC |
characteristic |
Dimensions(W x H x D)(mm) | 120.5×80×62 |
Power consume | 7W |
Memory |
| |
With run mode edit | 25K bytes |
Without run mode edit | 50K bytes |
Data memory | 20408bytes |
I/O |
Local digital inputs | 14 inputs |
Local digital outputs | 10 outputs |
Digital I/O image size | 256(128 inputs/128 outputs) |
Analog I/O image size | 64(32 inputs/32 outputs) |
expansion modules allowed (Max) | 7 modules |
| |
Pulse catch inputs | 14 |
High-speed counters | 6 counters total |
| |
Two phase | 4 at 20KHz |
Pulse outputs | 2 at 20KHz(DC outputs only) |
General |
Timer | Total number:256(1ms:4;10ms:16;100ms:236) |
| |
| |
Time interrupts | 2 with1ms resolution |
| |
Real Time Clock | Built-in |
Communications Built-in |
Ports | 2 RS-485 ports, within1standard PPI port |
PPI Baud Rates | 9.6,19.2 and 187.5 kbaud |
| |
| |
Max. number of stations | 32 per segment, 126 per network |
Max. number of masters | 32 |
| |
Power |
Input voltage | 20.4 to 28.8 V DC |
| |
|
Inrush current | 12A at 28.8 V DC |
Isolation(field to logic) | Not isolated |
| |
Sensor voltage | L+ minus 5 V |
Current limit | 1.5A peak,thermal limit non-destructive |
| |
Isolation (sensor to logic) | Not isolated |
CPU Digital Input Specifications |
Built-in digital input | 14 inputs |
| |
Rated voltage | 24 V DC at 4mA |
| |
Surge voltage | 35 V DC for 0.5s |
Logic “1” voltage range | 15 to 30 V DC |
Logic “0” voltage range | 0 to 5 V DC |
| |
Isolation (field to logic) | Yes |
| |
Isolation groups | Refer to Wiring diagram |
High Speed Counter (HSC) input rate | |
| |
HSC logic level 1(15 TO 26 VDC) | 30K Hz (Single phase), 20K Hz (Tow phase), |
| |
Cable length Max. | |
Shielded | 500m normal inputs, 50m HSC inputs |
| |
CPU Digital Output Specifications |
Built-in outputs | 10 outputs |
| |
Rated voltage | 24 V DC |
Voltage range | 20.4 to 28.8 V DC |
| |
Logic “1” (Min) | 20 V DC,at maximum current |
Logic “0” (Max) | 0.1 V DC with 10KΩ load |
| |
Rated current per common(Max) | 6A |
| |
Lamp load (Max) | 5W |
Inductive clamp voltage | L+ minus 48 V DC, 1w dissipation |
Optical (galvanic, field to logic) | 500 VAC for 1 minute |
| |
| |
Isolation groups | Refer to wiring diagram |
| |
Off to on | 2µs(Q0.0,Q0.1), 15µs(others) |
On to off | 10µs(Q0.0,Q0.1), 130µs(others) |
Cable Length (Shielded) | 500m |
Cable Length (unshielded) | 150m |
Number | 6ES7 214-1AD23-0XB0 |