Active Member
|
[China]
Address: #1318-19,13/F, Hollywood Plaza, 610 Nathan Road, Mongkok, Kowloon, Hong Kong, China
Contact name:Lin
Shenzhen Jetacon Technology Limited |
|
|
| Central Processing Unit CPU | S7 200 PLC Part No. | plc model |
| 8 input/6 output, Transistor | 6ES7 212-1AB23-0XB0 | CPU 222, DC PS, 8DI DC/6DO DC |
| 8 input/6 output, Relay | 6ES7 212-1BB23-0XB0 | CPU 222, AC PS, 8DI DC/6DO RELAY |
| 14 input/10 output, Transistor | 6ES7 214-1AD23-0XB0 | CPU 224, DC PS, 14DI DC/10DO DC |
| 14 input/10 output, Relay | 6ES7 214-1BD23-0XB0 | CPU 224, AC PS, 14DI DC/10DO RELAY |
| 14 input/10 output, Transistor; 2 point analog input,1 point analog output | 6ES7 214-2AD23-0XB0 | CPU224XP, DC PS, 14DI DC/10DO DC/2AI/1AO |
| 14 input/10 output, Relay; 2 point analog input,1 point analog output | 6ES7 214-2BD23-0XB0 | CPU224XP,AC PS,14DI DC/10DO REL./2AI/1AO |
| 24 input/16 output, Transistor | 6ES7 216-2AD23-0XB0 | CPU 226, DC PS, 24DI DC/16DO DC |
| 24 input/16 output, Relay | 6ES7 216-2BD23-0XB0 | CPU 226, AC PS, 24DI DC/16DO RELAY |
-
| PLC CPU226 | |
| ·Strong capabilities of high-speed computering and data | |
| processing | |
| ·Program memory:72KB | |
| ·Boolean execution speed: 0.08µs per instruction | |
| ·Port:2 RS-485 ports, within1standard PPI port | |
| Technical specifications | |
| Model | CPU226 DC/DC/DC |
| Physical characteristic | |
| Dimensions(W x H x D)(mm) | 196×80×62 |
| Power consume | 11W |
| Memory | |
| With run mode edit | 36K bytes |
| Without run mode edit | 72K bytes |
| Data memory | 40960bytes |
| I/O | |
| Local digital inputs | 24 inputs |
| Local digital outputs | 16 outputs |
| Digital I/O image size | 256(128 inputs/128 outputs) |
| Analog I/O image size | 64(32 inputs/32 outputs) |
| expansion modules allowed (Max) | 7 modules |
| intelligent modules allowed (Max) | 7 modules |
| Pulse catch inputs | 24 |
| High-speed counters | 6 counters total |
| Two phase | 4 at 20KHz |
| Pulse outputs | 2 at 20KHz(DC outputs only) |
| Power | |
| Input voltage | 20.4 to 28.8 V DC |
| Input current | 110mA while CPU only at 24 V DC |
| 700mA while Max. load at 24 V DC | |
| Inrush current | 12A at 28.8 V DC |
| Isolation(field to logic) | Not isolated |
| Hold up time(loss of power) | 1s at 24 V DC |
| Sensor voltage | L+ minus 5 V |
| Current limit | 1.5A peak,thermal limit non-destructive |
| Isolation (sensor to logic) | Not isolated |
| CPU Digital Input Specifications | |
| Built-in digital inputs | 24 |
| Input type | PNP/NPN |
| Rated voltage | 24 V DC at 4mA |
| Max. continuous permissible voltage | 30 V DC |
| Surge voltage | 35 V DC for 0.5s |
| Logic “1” voltage range | 15 to 30 V DC |
| Logic “0” voltage range | 0 to 5 V DC |
| Input delay | Selectable (0.2 to12.8ms) |
| Isolation (field to logic) | Yes |
| Optical galvanic | 500 V AC for 1minute |
| Isolation groups | Refer to Wiring diagram |
| HSC logic level 1(15 TO 26 V DC) | 30K Hz (Single phase), 20K Hz (Tow phase), |
| Inputs on simultaneously | all |
| Shielded | 500m normal inputs, 50m HSC inputs |
| unshielded | 300m normal inputs |
| CPU Digital Output Specifications | |
| Built-in outputs | 16 outputs |
| Rated voltage | 24 V DC |
| Voltage range | 20.4 to 28.8 V DC |
| Surge current (Max.) | 8A for 100ms |
| Logic “1” (Min) | 20 V DC,at maximum current |
| Logic “0” (Max) | 0.1 V DC with 10KΩ load |
| Isolation | |
| Isolation groups | Refer to wiring diagram |
| Cable Length (Shielded) | 500m |
| Cable Length (unshielded) | 150m |
| Order number | 6ES7 216-2AD23-0XB0 |
-
-
