|
[China]
Trade Verify
Address: Room 1105, block B, Huijin business center, No. 20# Renmin East Road, yangshe Town, Zhangjiagang City, Jiangsu, China
Contact name:Sara
Dawson Machinery & Mould Group Co.,Ltd |
|
Verified Suppliers
|
|
|
| Unit | Item | Specification | |
| Machine type | ABLB82PC | Accumulator head | |
| Extruding unit | max. container capacity | 25 | L |
| screw diameter | 82 special for PC | mm | |
| screw L/D ratio | 38: 1 | L/D | |
| screw speed | 10-80 | rev. /min | |
| plasticizing capacity | 90 | kg/h | |
| number of heating zone | 7 | zone | |
| extruder heating power | 16.7 | kw | |
| Die head | max accumulator capacity | 1.85 | L |
| max injection speed | 1 | kg/sec | |
| max head tooling diameter | 130 | mm | |
| die head heating zone | 4 | zone | |
| die head heating power | 12.3 | kw | |
| Clamping unit | platen valid size(w× h) | 800× 800 | mm |
| platen daylight | 250-800 | mm | |
| clamping force | 220 | kn | |
| Bottom blowing unit (optional) | expansion stroke | 140-350 | mm |
| blow pin auto-lifting stroke | 100 | mm | |
| blow pin manual-lifting stroke | 200 | mm | |
| Robot arm (optional) | moving stroke | 1000 | mm |
| Machine frame | lifting stroke | 350 | mm |
| lifting speed | 30 | mm/min | |
| Hydraulic system | main-pump rated pressure | 12 | mpa |
| main-pump rated volume | 180 | L/min | |
| hydraulic driving power | 45 | kw | |
| parison control hydraulic servo system | MOOG | ||
| Rated volume | 23 | L/min | |
| hydraulic pump power | 4 | kw | |
| Pneumatic system | max. pressure | 8 | kg/cm2 |
| operating pressure | 0.6 | mpa | |
| air consumption | 0.4 | m 3 /min | |
| Water source | water supply pressure | 0.3 | mpa |
| Electricity | Voltage | AC380± 10% | V |
| Frequency | 50 | HZ | |
| Phase | 3 phase 4 wire | ||
| Installation capacity | total rated power | 78 | kw |
| average consumption | 42 | kw/h | |
| total weight | 11.8 | ton | |
| dimension(L× W× H) | 6000× 2200× 4500 | mm | |
