Jiangsu Jianda Drying Engineering Co., Ltd |
Buttermilk Infant food drum dryer project description: Buttermilk infant food, refers to the milk products obtained from the milk or cream in the milk particles, it contains no less than 8.25% of the fat-free dry matter. Usually made of milk as raw material, rich in protein and fat, vitamin A,...
Buttermilk Infant food drum dryer
project description:
Buttermilk infant food, refers to the milk products obtained from
the milk or cream in the milk particles, it contains no less than
8.25% of the fat-free dry matter. Usually made of milk as raw
material, rich in protein and fat, vitamin A, calcium and
phosphorus.
Jiangsu Jianda Dry Engineering Co., Ltd., developed and produced of
Buttermilk Infant food drum dryer, effectively help you to dry the
buttermilk infant food.
First, Buttermilk Infant food drum dryer principle:
Double drum scraper dryer is through the rotation of the cylinder,
in a heat conduction way to dry the liquid phase material or ribbon
material which is attached to the outer wall of the drum dryer, it
is a continuous operation equipment. The material to be dried is
fed from the upper tank into the feeding tank of the double drum
scraper dryer. The drying drum is driven at the specified speed by
the drive. Material from the districuting coating device, to form a
coating on the drum wall. The cylinder continuously into the
heating medium, heating the cylinder, the heat transfer from the
cylinder wall to make the water content vaporized, and then the
dried qualified material wil be scraped by the scraper, sent by the
screw conveyor to the tank, then packaging. The removed moisture
from the evaporation, depending on its nature through the closed
cover, into the corresponding treatment device; generally it is
water vapor, can be directly from the top of the exhaust pipe into
the atmosphere. The machine is mainly used for processing liquid
materials, either uses the steam, hot water or hot oil heating for
drying, but also can use cold water cooling knot.
Second, Buttermilk Infant food drum dryer characteristics:
1, High thermal efficiency: the supply heat to the cylinder, due to
the drum dryer heat transfer mechanism is a heat conduction, heat
transfer direction in the entire operation cycle maintains
consistency, in addition to a small amount of heat radiation and a
few heat loss at the cover, the majority of heat for evaporation,
thermal efficiency can be as high as 80-90%.
2, Flexible operation, wide applicability. Can adjust a lot of
drying factors of the drum dryer. Such as the concentration of the
feeding material, the thickness of the coating film, the
temperature of the heating medium, the rotational speed of the
drum, etc., All can change the drying efficiency of the drum dryer,
and many factors are not implicated. This gives the drum drying
operation a great deal of convenience, so that it can adapt to a
variety of materials and different production drying requirements.
3, Short drying time. The drying cycle of the material is generally
only 10-15 seconds, suitable for heat-sensitive materials. If the
drum dryer is set in a vacuum condition, it can be operated under
reduced pressure.
4, The drying rate is high. As the coating film on the wall is very
thin, generally 0.3-1.5mm, and heat transfer, mass transfer
direction are the same.
If the buttermilk infant food drum dryer meets your requirement, welcome to buy the high quality and durable dryer from our factory. Well acknowledged as one of the leading manufacturers and suppliers of buttermilk infant food drum dryer, we must be your best choice. Don't miss it.
Your Name: | |
*E-mail: | |
Phone: | |
Company: | |
Title: | |
*Content: | |