|
[China]
Trade Verify
Address: No.25, Gaoxin 6th Road, Hi-tech zone, Xi'an, China
Contact name:Lee M
XI‘AN ZZTOP OIL TOOLS CO.，LTD |
|
Verified Suppliers
|
|
|
CD-series elevators are the important tools for hanging drill rods, casing pipes, drill
collarless and for oil pipes elevation and descend in the works of well drilling, exploration or repairing by the petroleum drilling and geologic at prospecting departments. Before using the products, please read carefully “instruction manual”.
“CD” series elevators are of reasonable designs, easy operation, safety and reliability, quality mentality materials and are manufactured by the adoption of advanced science and technologies and specially heat – treated with strong tenacity. They have undergone the strict test and non – damage inspections, which ensures they have the advantageous structural strength and wear – re – sizing properties. It is fit for elevating hanging drill rods from 2.3/8 ′′~5.1/2′′,casing pipes from 4.1/2′′~30′′,drill collar of diameter From 4.1/8′′~11.1/4′′ and oil pipe from 2.3/8′′~4′′.The max load are of two series 360kN(40t),585kN(65t), 675kN(75t),900kN(100t),1125kN(125t),1350kN(150t),1800kN(200t),2250kN (250t),2700kN(300t),3150kN(350t).
All the technical parameters and properties of the “CD” series elevators are in conformity with the requirements SY5035 and API Spec 8C.
The CD – series side door elevator, is mainly composed of the body, valve and other parts. Valve are connected with the body by valve axle and role around the valve axle, Which has the function of opening and closing the elevator. When the valve close the are automatically yoked tight with the body through the upper and lower lock pegs. Press down the handle of lock peg and pull outward, the valve will open. On the top the body is fixed
with the dual safety block iron due to which the valve cannot open or close when the elevator is been lifting. Only when there is no block iron on the load – bearing surface of the body, can the valve be opened freely for safely protection.
For the safety of lowering the steel tubes. Each elevator has a pair of safety pegs. Place the elevator links links the ear bores of two sides of the body and insert the safety pegs to prevent the elevator links off to ensure the safety of elevating.
Main Technical Parameters
Elevators for hanging drill pipe
Specification | Bore Dia.mm |
Max Load kN(t) | Drill pipe Size and Type | ||
Top Bore | Bottom Bore | in | mm | ||
CD 63×69-(Max. Load) |
69 |
63 | 1110(125) 1335(150) 1780(200) 2225(250) 2670(300) 3115(350) |
2.3/8EU |
60.3 |
CD 76×86-( ) |
86 |
76 |
2.7/8EU |
73.0 | |
CD 92×103-( ) |
103 |
92 |
3.1/2EU |
88.9 | |
CD 105×110-( ) |
110 |
105 |
4IU |
101.6 | |
CD 105×118-( ) |
118 |
105 |
4EU |
101.6 | |
CD 118×122-( ) |
122 |
118 |
4.1/2IU |
114.3 | |
CD 118×122-( ) |
122 |
118 |
4 1/2IEU |
114.3 | |
CD 118×131-( ) |
131
| 118 | 4.1/2EU | 114.3 | |
CD 131×135-( ) | 135 | 131 | 5IEU | 127.0 | |
CD 144×149-( ) |
149
| 144 | 5.1/2IEU | 139.7 | |
Elevators for hanging casings
| Specification | Bore dia. Mm | Max Load KN (t) | External diamter of casing | |
| in | mm | |||
| CD 117- (Max. Load) | 117 | 1100(125) 1335(150) 1780(200) 2225(250) 2670(300) 3115(350) | 4.1/2 | 114.30 |
| CD 123-( ) | 123 | 4 3/4 | 120.65 | |
| CD 130-( ) | 130 | 5 | 127.00 | |
| CD143-( ) | 143 | 5.1/2 | 139.70 | |
| CD149-( ) | 149 | 5 3/4 | 146.05 | |
| CD156-( ) | 156 | 6 | 152.40 | |
| CD171-( ) | 171 | 6.5/8 | 168.28 | |
| CD181-( ) | 181 | 7 | 177.80 | |
| CD198-( ) | 198 | 7.5/8 | 193.68 | |
| CD201-( ) | 201 | 7.3/4 | 196.85 | |
| CD223-( ) | 223 | 8.5/8 | 219.80 | |
| CD233-( ) | 233 | 9 | 228.60 | |
| CD248-( ) | 248 | 9.5/8 | 244.48 | |
| CD255-( ) | 255 | 9.7/8 | 250.83 | |
| CD278-( ) | 278 | 10.3/4 | 273.05 | |
| CD303-( ) | 303 | 298.45 | ||
| CD332-( ) | 332 | 12.7/8 | 327.03 | |
| CD245-( ) | 245 | 13.3/8 | 339.73 | |
| CD351-( ) | 351 | 13.5/8 | 346.08 | |
| CD361-( ) | 361 | 14 | 355.60 | |
| CD412-( ) | 412 | 16 | 406.40 | |
| CD464-( ) | 464 | 18 | 457.20 | |
| CD479-( ) | 479 | 18.5/8 | 473.08 | |
| CD515-( ) | 515 | 20 | 508.00 | |
| CD553-( ) | 553 | 21.1/2 | 546.10 | |
| CD566-( ) | 566 | 22 | 558.80 | |
| CD618-( ) | 618 | 24 | 609.60 | |
| CD630-( ) | 630 | 24.1/2 | 622.30 | |
| CD669-( ) | 669 | 26 | 660.40 | |
| CD695-( ) | 695 | 27 | 685.80 | |
| CD720-( ) | 720 | 28 | 711.20 | |
| CD772-( ) | 772 | 30 | 762.00 | |
| CD823-( ) | 823 | 32 | 812.80 | |
| CD926-( ) | 926 | 36 | 914.40 | |
About JC Wellhead
Jingcheng Petroleum Machinery Manufacturing Co.,Ltd was established in 2008, we are specialized in design and manufacturing of the oilfield wellhead equipment. We - YCJC are a registered supplier for CNPC, GWDC, CCDC in China and got the API certificate from 2010.
In 2012, JC wellhead jointed with ZZ TOP Oil tools to expand the international business, in order to meet the customers' various requirement, we work with other large drilling rig companies to supply the other oilfield equipments, such as drilling rig components (mud pump & parts, rotary swivel, travelling block, hook etc), handling tools ( slip, elevator, spider, casing tong, power tong, mual tong etc.) and so on.
YCJC also engaged in abroad marketing, through these years of efforts, our wellhead equipment is exported to many countries, such as Thailand, UAE, Iran, Brazil, Argentina, USA etc. and enjoyed good reputation from the customers.
