Active Member
|
[China]
Address: Songjin industrial area,Songjiang District,Shanghai,China
Contact name:Isaac
Shanghai Qiangdi Machinery Equipment Co.,Ltd |
|
|
We can design different capacity autoclave sterilizer from customer request, suit for canned food,pouches food,glass and plastic bottle juice etc.Different sterilization method,like water bathing type,steam spraying type etc.
autoclave sterilizer main specification:
| internal pot diameter | design customer needs |
| setting pressure | 0.35MPa |
| design temprature | 145 degree |
| pot material | SUS 304 |
| body thickness | 4mm |
| cooling and heating type | indirect heating and indirect cooling |
| application package type | glass,plastic, PP,PE etc |
Video on youtube:https://youtu.be/RDDdae1bZwY
autoclave sterilizer Working Principle:
1. Water filing
Prior to the start of the process, the retort is filled with a
small volume of process water such that the water level is below
the bottom of the baskets. This water can be used for successive
cycles if desired, as it is sterilizec with each cycle.
2. Heating
Once the cycle is begins, the steam valve opens and the circulation
pump is switched on. The mixture of steam and water spraying from
top of the retort vessel creats highly turbulent convection
currents that rapidly homogenizes the temperature at every point in
the retort and between the containers.
3. Sterilization
Once the programmed sterilization temperature has been reched, it
is held for the programmed time with +/-1 °F . Similarly, the
pressure is kept with +/- 1 psi by adding and venting compresed air
as needed.
4. Cooling
At the end of the sterilization step, the retort switches into
cooling mode. As the process water continues to be circulated
through the system, a portion of it is diverted through on side of
a plate heat exchanger. At the same time, cold water passes through
the other side of plate heat exchanger. This results in the process
water inside the retort chamber being cooled in a controlled
fashion.
5. End of cycle
Once the retort is cooled to the programmed temperature setpoint,
the cold water inlet valve on the heat exchanger closed and the
pressure inside thr retort is autoamtically relieved. The water
level is lowered from the maximun down to the medium level. The
door is equipped with a safety locking device which prevents the
oping of the door in the case of residual pressure or high water
level.
Sweet Corn Retort Autoclave Potretort autoclave pot
autoclave sterilizer pictures:
Contact details:
