|
[China]
Trade Verify
Address: Address: Bldg 20, No.511 Huangpujiang North Rd., Kunshan China,215300
Contact name:Tom Zhao
Omatei Mechanical And Electrical Equipment Co., Ltd |
|
Verified Suppliers
|
|
|
FWD 3 JAW COMPENSATION WITH CENTER POWER CHUCK
BAND:NTH
1. It's suitable for shaft machining, the chuck have the function of compensation clamping and pulling back, the compensation size is 5mm.
2. The tailstock support the shaft, after compensation clamping, the chuck pull the shaft back to center, better concentricity can be made.
Unit:mm
| Spec Model | Plunger stroke (mm) | Jaw stroke (Dia) (mm) | Max clamping dia (mm) | Min clamping dia (mm) | Max.D.B.Pull KN(kgf) | Max clamping force KN(kgf) |
| FWD-06A5 | 16 | 13 | 35 | 6 | 14.7(1500) | 25.0(2550) |
| FWD-08A6 | 20 | 18 | 65 | 16 | 19.6(2000) | 34.3(3500) |
| Spec Model | Compensation (mm) | Max RPM | I kg*m2 | Weight kg | Matched cylinders | Max.pressure Mpa(kgf/cm2) |
| FWD-06A5 | 5 | 3500 | 0.2 | 13 | SNK-100 | 2.1(21) |
| FWD-08A6 | 6 | 3000 | 0.5 | 22 | SNK-100 | 2.8(28) |
| Spec Model | A | B | C(H6) | D | D1 | D2 | E | G |
| FWD-06A5 | 168 | 116 | 140 | 104.8 | 82.56 | 24 | 15 | 4--20 |
| FWD-08A6 | 210 | 127 | 170 | 133.4 | 106.38 | 32 | 17 | 9--29 |
| Spec Model | H | J | L | M | N | P | T |
| FWD-06A5 | 38 | 50 | 52 | M10x120 | 55 | 14 | 34 |
| FWD-08A6 | 38 | 58 | 61 | M12x125 | 67 | 20 | 41.5 |
Remark: FWD-06 chuck’s center is spring type, when clamping, it’s based on the center, the workpiece could be pulled onto the position base, so as to make axial postion.
Subject to technology changes without prior information
Non-standard requirements can be made
