|
[China]
Trade Verify
Address: Address: Bldg 20, No.511 Huangpujiang North Rd., Kunshan China,215300
Contact name:Tom Zhao
Omatei Mechanical And Electrical Equipment Co., Ltd |
|
Verified Suppliers
|
|
|
PTG EXPANDING MANDREL
Brand:NTH
Large expansion range up to 0.6mm.
Double-angle principle allows for fast loading/unloading of
components.
Greater holding power by applying pressure evenly along the length
of the sleeve.
Guaranteed accuracy of 0.015mm.
Standard Model | 3A1 | 2C1 | 1C1 | 18C1 | 4C1 | 5C1 | 6C1 | 7C1 | 8C1 |
|---|---|---|---|---|---|---|---|---|---|
A ( Dia) | Min:12.5 | Min:16.0 | Min:22.0 | Min:28.5 | Min:41.0 | Min:63.5 | Min:76.2 | Min:89.0 | Min:130.0 |
| B | 60 | 66 | 72 | 79 | 84 | 109 | 118 | 133 | 153 |
| C | 20 | 20 | 20 | 20 | 20 | 25 | 25 | 30 | 30 |
| D | 22 | 27 | 32 | 38 | 43 | 51 | 57 | 63.5 | 79.5 |
| E | 14.6 | 15 | 15.5 | 15.3 | 14.8 | 25.3 | 24.7 | 25.2 | 24.6 |
| F | 20 | 22 | 30 | 31 | 36 | 36 | 37 | 47 | 22 |
| G | 40 | 40 | 40 | 40 | 40 | 60 | 60 | 100 | 100 |
| H | 75 | 75 | 75 | 75 | 75 | 120 | 120 | 180 | 180 |
| J | 11 | 15 | 20 | 26.5 | 37.5 | 55 | 74.5 | 86.5 | 124 |
| K | 6 | 6 | 6 | 6 | 6 | 6 | 6 | 6 | 6 |
| L | 12.6 | 14.1 | 20.7 | 26.3 | 37 | 57.3 | 71.1 | 84.1 | 123 |
| M(Screw) | M4 | M8 | M8 | M10 | M12 | M20 | M20 | M24 | M36 |
N(Screw) | Ø58-M8 | Ø58-M8 | Ø58-M8 | Ø58-M8 | Ø58-M8 | Ø94-M10 | Ø94-M10 | Ø150-M12 | Ø150-M12 |
| R(Screw) | Ø28-M4 | Ø28-M4 | Ø58-M6 | Ø58-M6 | Ø58-M6 | Ø94-M8 | Ø94-M8 | Ø150-M10 | Ø150-M10 |
Pulling force(kgf) | 700 | 1000 | 1200 | 1800 | 2300 | 2800 | 3200 | 3700 | 5500 |
Flush type | 3A2 | 2C2 | 1C2 | 18C2 | 4C2 | 5C2 | 6C2 | 7C2 | 8C2 |
|---|---|---|---|---|---|---|---|---|---|
| A(Dia) | Min:16. | Min:22.0 | Min:28.5 | Min:40.0 | Min:51.0 | Min:73.0 | Min:89.0 | Min:101.0 | Min:143.0 |
| C | 20 | 20 | 20 | 20 | 20 | 25 | 25 | 30 | 30 |
| D | 26 | 32 | 38 | 45 | 50 | 60 | 69 | 78.5 | 99.5 |
| E | 14.6 | 15 | 15.5 | 15.3 | 14.8 | 25.3 | 24.7 | 25.2 | 24.6 |
| F | 20 | 22 | 30 | 31 | 36 | 36 | 37 | 47 | 22 |
| G | 40 | 40 | 40 | 40 | 40 | 60 | 60 | 100 | 100 |
| H | 75 | 75 | 75 | 75 | 75 | 120 | 120 | 180 | 180 |
| J | 11 | 15 | 20 | 26.5 | 37.5 | 55 | 74.5 | 86.5 | 124 |
| K | 6 | 6 | 6 | 6 | 6 | 6 | 6 | 6 | 6 |
| L | 12.6 | 14.1 | 20.7 | 26.3 | 37 | 57.3 | 71.1 | 84.1 | 123 |
M((Screw) | M4 | M8 | M8 | M10 | M12 | M20 | M20 | M24 | M36 |
N(Screw) | Ø58-M8 | Ø58-M8 | Ø58-M8 | Ø58-M8 | Ø58-M8 | Ø94-M10 | Ø94-M10 | Ø150-M12 | Ø150-M12 |
R(Screw) | Ø28-M4 | Ø28-M4 | Ø58-M6 | Ø58-M6 | Ø58-M6 | Ø94-M8 | Ø94-M8 | Ø150-M10 | Ø150-M10 |
| Pulling force(kgf) | 700 | 1000 | 1200 | 1800 | 2300 | 2800 | 3200 | 3700 | 5500 |
Subject to technology changes without prior information
Non-standard requirements can be made
