Tips: 
 

How to measure Handbrake

1. First of all, the brake pad consists of two parts: one is a metal base plate, and the other is a friction plate. When braking, the friction pads come into contact with the brake disc to generate friction, which acts as a brake. Obviously, the friction lining will get thinner and thinner. The friction pad part of the new brake pads is generally 10 mm. When there are 5 mm left, it is time to consider replacing the brake pads. 2mm left is quite dangerous and the brake pads must be replaced immediately.

2. Some brake pads will hide a metal needle in the friction pad. After the friction pad is worn to a certain extent, the metal needle will contact the brake disc, and a sharp abnormal sound will be produced when braking, reminding you to replace the brake pad.

3. If the friction plate is completely exhausted, the metal base plate will be in direct contact with the brake disc, which will not only fail to brake, but also wear out the brake disc. At that time, you have to replace the brake disc together, which will cost thousands of dollars. You can clearly see the condition of the brake pads when the tire is removed. Brake pads are consumables and will gradually wear out during use. When they are worn to the limit, they must be replaced. Otherwise, the braking effect will be reduced, and even safety accidents will be caused.

Isuzu 700P NPR Handbrake




Engine Assembly and Engine Parts for More models as following:

Office:

More Spare Parts:

Packing:


Wearhouse: