0.3mm/m Flying Shear Cutting Machine High Shearing Accuracy

Steel Shearing Machine Flying Shear for Profile Steel Production Line

The fixed length flying shears should guarantee good shear quality, such as accurate fixed length, neat cutting surface and wide fixed length adjusting range, and at the same time have certain shear speed.In order to meet the above requirements, the structure and performance of the flying shear must meet the following requirements during the shear process:

1. The horizontal speed of the cutting edge shall be equal to or slightly greater than the speed of the rolled piece

2. The two cutting edges should have the best cutting edge clearance

3. In the shearing process, the cutting edge had better be translational in plane, that is, the cutting edge is perpendicular to the surface of the rolled piece

4. Flying shears should work in accordance with a certain working system to ensure the length of the length

5. The acceleration and mass of the moving components of the flying shear should be minimized to reduce the inertia force and dynamic load

Long rod flying shear machine is used in the continuous rod and wire rolling production line for rolling pieces of cutting equipment, in the process of rolling pieces in the actual rolling pieces of cutting head, cutting tail, accident broken and finished product times the length of the shear.We according to different GaXian on different functional requirements to provide different types of flying shear design, such as the crank connecting rod type flying shear machine, rotary flying shear and crank connecting rod + rotary combined type flying shear, different structure in different conditions with different shear rate and shear force, and on the GaXian electromechanical integration control system under the control of frequent rev, braking,Shearing is achieved at large inertia.

Performance characteristics:

Large shear section, large shear force

High shearing accuracy

Optimized box stability, good running stability

This shear is used to cut different sized metal tube and pipe materials.

Specification:

1. With hydraulic drive, convenient operation, simple maintenance.

2. Machine and oil tank are in set without installation.

3. High pressure cutting without breakout.

1. Lower investment

2. Steady performance

3. Products are customized for different demands

4. Product capacity can be adjusted according to customer's request

5. Low energy consumption

Packaging Details: Wooden case packing or nude packing

Port: Tianjin

Lead Time: