Button Switch Load Displacement Curve Testing Machine for Various Buttons and Switches

Button Switch Load Displacement Curve Testing Machine for Various Buttons and Switches

Model: iRY-19

iqualitrol automatic key switch load stroke curve tester Button displacement switch load curve testing machine look for agents best price is applies to all kinds of rubber buttons, metal buttons and switches for shrapnel(load displacement) curves,while under pressure to complete the rebound test.

Operation is simple,automated storage test data(load-displacement curve,life decay curve,the test results),and all test conditions can be stored.The machine adopts the high precision load cell measurement and servo motor drive can be accurately measured the detection equipment.

Button-Switch Load Displacement Curve Tester for Various Buttons and Switches (Load-Displacement), the software operation is simple and convenient, and all data can be saved (test conditions, displacement curves, life curves, inspection reports, etc.).

Button-Switch Load Displacement Curve Tester equips with a servo motor drive to provide a high-precision (load-displacement) measurement that results in a completely accurate key and switch curve test.

Features:

1, PEAK FORCE, RETURNFORCE, DISTANCE and CLICK rates can be directly displayed on the graph without manual calculation.

2, The measurement curve is remembered by the computer and can be zoomed in and out at any time. A piece of A4 paper can be arbitrarily designated to place N graphs

3, The upper and lower limit specifications can be entered for the measurement item. The measurement result can be automatically determined by OK or NO.

4, The maximum measurement stroke and load can be input, and the computer automatically controls.

5, Test report can be converted to EXCEL and other report formats.

6, Inspection report can be generated automatically, no need to input again.

7, Inspection report header can be modified at any time.

8, The test conditions are set by the computer screen, convenient and fast.

9, Test data is stored on the hard disk. (Each data can be stored for an unlimited number of times).

10, The computer directly prints and stores the force displacement curve and inspection report. (No squared paper is required, normally A4 paper is sufficient).

11, Load unit display N, Ib, g, kg can be freely switched S205 button-switch load.

Technical Specifications: