Active Member
|
[China]
Address: Room 301, Building No.1, No. 2 Jiaolian Yiheng Rd, Wanjiang District, Dongguan, China, 523046
Contact name:Raymond Chung
Dongguan Quality Control Technology Co., Ltd. |
|
|
Programmable Automatic Large Vertical Metallographic Cutting Machine Section Diameter 160mm
Model: iCut-861
Technical Data Download: iqualitrol Cutting Machine iCut-861
Brief Introduction:
iCut-861 sample cutting machine is a large vertical metallographic cutting machine on the basis of the safety, environmental protection principle, suitable for cutting various metals, non metal samples, in order to observe the metallographic, petrographic structure.
This machine is stable operation, low noise, easy to operate, which is the ideal equipment for laboratory use.
iCut-861 composed of a cutting system, cooling system, lighting system, cleaning system, etc. The upper equipment is fully covered by the protective cover. There is a large observation window in front of the protective cover with high brightness illumination system.
The operator can grasp the cutting process at any time. The cast
iron table with a groove can cut all kinds of special-shaped
workpiece. The strong cooling system does not burn the workpiece
when cutting the workpiece. The cooling water tank is placed inside
the equipment base and the water tank has a magnetic separator,
which is easy to collect the scraps.
Technical Parameters:
| Model | iCut-861 |
| Cutting pattern | chop-cutting,pulse cutting and reciprocating cutting |
| cutting speed | 0.005-1mm/s |
| Spindle rotation | 200-2200rpm |
| Maximum stroke | X axis-240mm,Y axis-200mm,Z axis-245mm |
| Cutting room size | 680mm*1030mm |
| MAX cutting diameter | Φ160mm |
| Input voltage | AC380V/50HZ/3Ph |
| Motor: | 8.5KW |
| Dimension | 1590x1600x1940mm |
| Net weight | 900kg |
