PHB-200 Brinell Portable Hardness Tester Digital Magnetic Type Max Force 187.5Kgf

PHB-200 Brinell Portable Hardness Tester Digital Magnetic Type Max Force 187.5Kgf

Brief Introduction:

With the magnetic chucks, fix the PHB-200 Digital Brinell Hardness Tester on the specimen surface and finish testing. It is completely based on the Brinell test principle, and the test method complies with GB/T231.2, ASTM E10, ISO6506.2.

Being used together with the Brinell Indentation Measurement System, it can be applied to quick and precise test of specimen’s Brinell hardness on site.

The PHB-200 Brinell tester could replace the Leeb hardness tester which is in low accuracy and reliability.

Main Applications:

Steel parts that too large or too heavy for bench hardness tester.
To testing heat treatment parts such as steel plate, pipe, mould with available testing surface.
To testing the hardness of weld joint on boilers, pressure vessels and pressure pipes.

Technical Data:

Test Force: 187.5kg
Test Force Error: ≦±1% Complies with GB/T231.2,ASTM E10, ISO6506.2
Indenter: 2.5mm test ball
Testing Range: 100-650HBW
Indication Error: Complies with GB/T231.2,ASTM E10, ISO6506.2
Indication Repeatability: Complies with GB/T231.2,ASTM E10, ISO6506.2
Operating Temperature: 5-45℃
Nominal Dimension: Length 245mm × Width 105mm × Height 238mm
Weight: 5.1kg
Test Piece Surface:
Flat: Area ≧195×60mm Thickness ≧5mm
Cylinder: Diameter ≧60mm Length ≧200mm, Thickness ≧8mm