Active Member
|
[China]
Address: Room 301, Building No.1, No. 2 Jiaolian Yiheng Rd, Wanjiang District, Dongguan, China, 523046
Contact name:Raymond Chung
Dongguan Quality Control Technology Co., Ltd. |
|
|
Touch Controller Large Size Walk in Programmable Temperature and
Humidity Test Chamber
Brief Introduction:
Programmable temperature and humidity test chamber simulates a full
range of temperature and humidity conditions to test reliability,
durability, climatic, freezing resistance, quality assurance,
thermal endurance etc.
Temperature humidity walk in test chamber is used for providing
large parts of the finished products, semi-finished products, large
temperature and humidity test environmental equipment to the
industry.
Application Range:
※ Electronics, Electrical appliances, Sensors
※ Semiconductor, PCB, LCD & LED
※ Medicals tests
※ Mechanical, Military, Aerospace products
※ Vehicles, Transport, Automobile supply industries
※ Chemicals, Petrochemical industries
※ Building materials, Plastics, Textile industries
※ Testing metal related industries like plating etc.
※ Instrumentation
iTemp Series Products Conform Following Standards:
※ IEC60068-3-5-2002 Environmental testing-Part 3-5 Support
documentation and guidance-Confirmation of the performance of
temperature chambers※ IEC6068-3-6-2002 Environmental testing-Part
3-6 Supporting documentation and guidance – Confirmation of the
performance of temperature/humidity chambers.
※ IEC68-2-1 (GB-2423.1-2008) Testing A: Low temperature testing
method
※ IEC68-2-2 (GB-2423.2-2008) Testing B: High temperature testing
method
※ MIL-STD-202F (GJB360.8-87) High temperature life testing
※ MIL-STD-810D (GBJ150.3) High temperature method
※ MIL-STD810D (GBJ150.4) Low temperature method
※ IEC68-2-3 (GB2423.3-93) Testing Ca: Constant moist heat testing
method
※ IEC68-2-30 (GB2423.4-93) Testing Db: Alternate moist heat testing
method
※ MIL-STD-810D (GJB150.9-93) Moist heat testing method
Optional Accessories:
※ Cable Port
Size of cable port is available for Ф100mm
※ Water purifier RO: 80
Continuously provide purified water for humidifying heater and
wet-bulb
※ Dehumidifier
The rotation regenerating dehumidifier M-120 ensures precise
control of low humidity (10℃, 15%RH) for electrostatic reliability
tests.
※ Defrosting Device
The chamber automatically detects and melts the frost on the
evaporator when operating below 0℃ in order to allow continuous
operation.
※ Electronic humidity sensor
Precision Humidity Sensor with stainless steel protection
tube
Specifications:
| Control Mode | Balanced Temperature and Humidity Control System |
| Operating Temp. & Humid. Range | +5℃ ～ +35℃; <85%R.H. |
| Internal Dimension | 2 * 2 * 2m = 8m3 |
| Temp. Range | -20℃ ~ +100℃(150℃) |
| Humid. range | 20% ～98%R.H. |
| Temp. & Humid. Fluctuation | ±0.5℃; ≤2%R.H. |
| Temp. & Humid. Uniformity | ≤2.0℃; ≤3%R.H. |
| Temp. & Humid. Resolution | 0.01℃; 0.1%R.H. |
| Temp. Heating Up Time | 0℃ ~ +100℃within 30min; -20℃ ~ +150℃within 45min |
| Temp. Pull Down Time | 20℃ ~ -40℃within 60min; 20℃ ~ -70℃within 85min |
| Power Supply | AC380V, 50/60HZ, Three-phase (Specified by User) |
| Exterior Material | Stainless steel with baking paint |
| Interior material | SUS304# Stainless steel |
| Insulation material | Rigid Polyurethane foam |
| Refrigeration System | Mechanical cascade refrigeration system; Fin type radiator |
| Circulation system | Mechanical convection system |
| Humidification Water Supply | Automatic water regulating, recoverable supply system, water shortage alarm system |
| Water Quality | Distilled water only, 20L Water tank capacity |
| Controller | Touch Screen Controller |
| Safety Devices | Overheat protector Switch, Compressor overload protector Switch |
| Accessories | Viewing window, Chamber Illumination, Cable port ø50mm, |
Note: 1, The performance values are no specimen inside the test
area.
2, At 20℃ ambient temperature, relative humidity 65%RH, rated
voltage
3, According to IEC60068-3-5:2001 and IEC60068-3-6:2001
4, The above specifications are for reference only.
Features:
※ Chamber exterior material is stainless steel with environmentally
baking paint resists corrosion and provides impact resistance.
Interior material is SUS304# stainless steel with excellent heat
resistance and easy to clean.
※ Touch screen controller HL-1000 is designed to save chamber
programming and setup time with temperature limit and alarm to
protect your products.
※ Safety relay connection is provided to protect your device under
test by removing power to it when the chamber is not running.
※ RS-232 communications is for computer connection, programming can
be set on computer by software, monitor testing process and
automatically execute power on/off functions.
※ Fog-free viewing window and interior light makes viewing
workspace freely and observe the test under best conditions.
※ Adjustable product shelf slides out for easier product access.
Shelf design is non-tipping and supports large product loads.
※ Left side of chamber with diameter 50mm cable port for power-on
test.
※ Optional electronic humidity sensor is used on all test chambers
for precision humidity measuring and minimal maintenance.
EXPORT STANDARD SEAWORTHY PACKING:
