Active Member
|
[China]
Address: Room 805 No.12,Yabao Rd Chaoyang District Beijing 100020 China
Contact name:wendy
Beijing Nubway S&T Co., Ltd |
|
|
808 Nm Eyebrow Diode Laser Hair Removal Machine With 10.4'' Screen
for clinic use (NBW-LII)
Advantages:
2, our machine use Germany DILAS laser
bar.
3, The highest 150J/c㎡ output power in the world and 400ms pulse width
which can make sure the best result of permanent hair removal and reduce the pain to the least.
4, 12*20mm big spot hair removal crystals
which
can save the treatment time, increase the energy output
Introduction:
Laser hair removal is a more effective solution to remove unwanted hair and with more comfort than other methods.
The laser that produces a larger beam of highly concentrated light.
The light emitted is well absorbed by the pigment located in the
hair follicles. During the procedure, the laser pulses for a
fraction of a second, allowing the hair to absorb the light and
heat up. As it heats up, the hair shaft and bulb are damaged which
significantly impedes its ability to re-grow. And with the large
spot size, the process treats numerous hair follicles
simultaneously, making the treatment much faster than traditional
laser hair removal alternatives. Laser hair removal
requires multiple treatments. This is because the laser works best
when hairs are in an early growth stage (referred to as anagen),
and all the hairs are not in this phase at the same time.
Laser Hair Removal Guide:
Laser hair removal is designed to permanently remove unwanted body hair by using the light energy from a laser.Unwanted hair is a common problem in women and men. Shaving, waxing, and tweezing only produce temporary results and can generally only be carried out on relatively small areas.Laser hair removal treatment can be used to permanently treat and remove small and large areas of unwanted hair from the body.Best results occur in those with light skin and dark hair, and hair removal works better on coarse hair rather than fine hair.
Painful or not:
During the initial stages, you will feel a light stinging
sensation, which indicates that the laser has been activated. Then
a series of impulses are produced and may cause a slight burning
sensation and some prickling. Your technician may apply a topical
anaesthetic to the body area under treatment, in order to minimize
the discomfort. But most people do not need the anaesthetic. Some
people have said that the feeling is like that of a rubber band
snapping against the skin.
Before and after pictures:
Specifications:
Laser type:Semiconductor laser
wavelength:808 nm
Output Mode:pulse output
Control Method:Touch control
Screen Size:10.4 Inch
Energy density:10-50J/cm2 (Deviation≤±2％)
Pulse width range:1-400ms
Spot size:12*20mm
Frequency:1-10HZ
Light spot surface temperature:0-30℃
Cooling System:Semiconductor+built-in water+Air Cooling triple cooling systems
Dimension:500×425×1120mm
Net weight:60kg
Fuse specification:Ø5×25 10A
Input Power:1800W
Power:AC220V±10% 10A 50HZ , 110v±10% 10A 60HZ
Our factory:
http://www.nubway.net
