WIFi IOT automation device, WiFi monitoring with IOT Gateway
System Feature
- Cortex M3 32-bit ARM
- Double watchdog to ensure stability
- Support signal fileter
- Support automatic network reconnection and data re-send
- Synchronize clock with multiple way, Sms, NTP, CwtIO Server
- Automatically execute preset task by schedule(second, minute,
day, week, month)
- Can automatically execute tasks according to preset Events
- Provide console utility for visual programming over 100
parameters
- Optional inside battery that life is 8-20 hours, cellular
module Intelligent sleep when power lost
DI feature
- Accept NO or NC dry contact
DO(T) feature
- Open-collector output(drive voltage=power supply voltage,
Drive current≤500mA)
- DO can be activated by remote or local schedule
- Remember status when power lost
DO(K) feature
- Relay NO contact output(load: 2A / 125VAC,220VDC)
- Remote or local event activate DO on/off/pulse
- Remember status when power lost
AI feature
- 4-20mA (option: 0-5V) in, Sampling frequency: 33Hz, 10-bit
precision)
- Convert 4-20mA(0-5V) to physical value
- Support offset and gain, alarm parameters, upload data
setting
- Signal lost alarm
SMS feature
- Support 10 cell phone numbers for alarm and control
- Any device alarm status can be sent by sending sms
- Customizable sms messages, like alarm, receove, report
- Query any IO channel’s status or value via sms command
- Control output via sms command
- Configurable schedule for sms report IO channel's status or
value
- Remote setting via sms commands
- Can query SIM card balance, sms forward
- Support power lost sms alarm and recover sms(works with
inside battery)
- Wireless network communication
- Option network: cellular(2g/3g/4g) or Wi-Fi
- Support TCP/IP two-way communication with Max.4 servers(IP or
domain)
- Events(e.g. alarm, timer) trigger upload data
- Support http post, Modbus TCP, CWT protocol over cellular or
Wi-Fi
- Support two-way data transparent transmission with RS485 or
RS232
Modbus feature
- polling salve over RS485 with modbus rtu protocol
- Can be a I O module to be read/write by modbus master
- As modbus to gprs/3g gateway
TI feature
- Can set high or lower level to alarm, data log via wireless
network
- Can switch ℃ or οF
- Support probe disconnect alarm