modbus rs485 to tcp ip converter, modbus serial to ethernet
converter
System Feature
- Industrial NXP 32-bit ARM MCU
- Double watchdog to ensure stability
- Support signal fileter
- Stable reconnection strategy for data transmit
- Update RTC automatically or manually, clock source support
Sms, NTP, CwtIO Server
- Can set multiple timers(second, minute, day, week, month) to
execute actions, e.g. output, upload data, change setting
- Support Interlock programming, Event trigger
- Provide configure software, visual programming, over 100
parameters can be set
- Optional inside battery that life is 8-20 hours, cellular
module Intelligent sleep when power lost
DI feature
- Monitor dry contact(NO or NC)
DO(T) feature
- Open-collector output(drive voltage=power supply voltage,
Drive current≤500mA)
- on/off/pulse DO by remote control or local event
- Status memory function for power lost
DO(K) feature
- Relay output(NO, contact load: 2A / 125VAC,220VDC)
- DO can be activated by remote or local schedule
- Remember status when power lost
AI feature
- 4-20mA (option: 0-5V) in, Sampling frequency: 33Hz, 10-bit
precision)
- Convert signal to actual measure value,support adjustment
- Can set parameters for value processing, alarm, data
transmission
- Signal lost alarm
SMS feature
- Can add 10 administrator numbers for alarm and remote control
- Send sms alarm when input is triggered or reach alarm level
- Editable alarm and recover sms with time stamp
- Can send sms command to request any channel status or value
- Control output via sms command
- Configurable schedule for sms report IO channel's status or
value
- Sending sms command to update setting
- Can query SIM card balance, sms forward
- Sms alar for power lost and recover
Wireless network communication
- Optianal onboard GPRS, 3g, 4g, Wi-Fi module
- Support TCP/IP two-way communication with Max.4 servers(IP or
domain)
- Automatically Upload data when alarm or according to schedule
- Communication protocol: Modbus TCP,http post, Cwt_IO(two-way
communication)
- Can forward data between wireless network with RS485 or RS232
Modbus feature
- Can work as a modbus master to poll salve over RS485
- Can work as a modbus slave to be read/write by master(HMI,
SCADA etc.)
- Run Modbus RTU or TCP protocol over GPRS/3G
