Single-use Injection System for IOLs Suggested Incision 2.2mm
Implantation of a foldable intraocular lens (IOL) during cataract
surgery through a small incision usually requires an injector
system. The Injection System for Intraocular Lens consists of a
sterile disposable injector with the silicone plug and a disposable
cartridge. The cartridge is made of medical grade polypropylene.
The product is used for the foldable intraocular lens implantation
in cataract surgery.
Single-use InjectionSystem for IOLs Suggested Incision 2.2mm
Features
- Microincision intraocular lens implantation is realized through
this injector system, which incision size range is
1.8mm/2.0mm/2.2mm2.4mm/2.6mm.
- The cartridge is made of medical grade polypropylene which has high
molecular weight uniformity and good biologival safety.
- The Injection System for Intraocular Lens structure design conforms
to the requirments of ergonomics with good control and stable
injectortion.
- The Injector has thicken head to prevent the cartridge from falling
out during Injector.
- The cartridge is closed tightly during injection process because of
locking mechanism design,whcih will benefit to smooth implantation.
- The cartridge tunnel is transparent, which is convenient observe
the intraocular lenses loading and avoid the failure of injection.
- The primary package of products is designed to ensure stable
transportation and avoid packaging debris falling off.
Single-use Injection System for IOLs Suggested Incision 2.2mm
Instruction for Use
- Open the package using standard sterile procedure.
- Apply moderate amount of viscoelastic gel into the cartridge
tunnel.
- Along the cartridge direction load the intraocular lens into the
center place of the opened cartridge with the lens in reverse "S"
shape, then close the folding wings with a "click" locking sound.
- Place the cartridge in the groove of the injector, press it down to
the bottom, and then push forward to the end.
- Use the injector to implant the intraocular lens.