Shenzhen Yunlink Technology Co., Ltd. |
|
11ac, MU-MIMO, dual band, 1200Mbps data rate, Gigabit WAN Port
Comply with 802.11ac standard, dual 2.4G and 5G band, 1200Mbps data
rate with Gigabit WAN port, it support MU-MIMO Wave2.0 Technology,
less Wi-Fi interference and high data rate ensure FR800 to provide
more stable and faster network access.
Multiple operation mode, simple to establish Mesh network.
FR800-M1 support Gateway, sub-node operation mode, flexible to
choose gateway operation mode for small house wireless coverage, or
pairs with gateway and sub-node operation mode, press reset button
to establish the mesh network for big house wireless coverage, suit
for different environment and application.
Varieties of Login method, Intelligent and Simple to setup
It is easy to Log in this wireless router by IP address, domain
name, scanning QR code, users can configure and manage it by PC,
Mobile phone; Easy and intelligent to finish the configuration
according to setup wizard in three steps, plug and play.
Smart to learn and remember dial account and password
If dial account or password is forgotten, FR800 with smart learning
function, can automatically save this account and password from the
router you once used and connect to the internet success.
Beamforming Technology
FR800-M1 support beamforming technology, focus wireless router’s
signal toward each end user, concentrating the data transmission so
that more data reach to the targeted users instead of radiating out
into the atmosphere, to improve video streaming, voice quality and
other bandwidth and latency-sensitive transmission.
Build in Wi-Fi Analyzer, automatic to select the optimal channel
The Wi-Fi analyzer will analysis the channel of surrounding
wireless signal, helpful to select the optimal channel, effectively
avoid Wi-Fi signal drop and latency.
Advanced Security and Firewall functions
FR800-M1 support varieties of encryption like WPA/WPA2/TKIP/AES,
SSID hidden, firewall like IP/Port filtering URL filtering, MAC
address filtering and port forwarding, DMZ to defend networking
threats.
Mesh Support
FR800-M1 support Mesh Technology, with self-organize and
self-configure ability, reduce the installation overhead, enable
dynamic distribution of workloads, particularly in the even that a
few nodes should fail, turn contributes to fault-tolerance and
reduce maintenance costs.
Spec:
Model | FR800-M1 | |||||
CPU | RTL8197FH + RTL8812BRH + RTL8211F | |||||
Flash | 8MB | |||||
RAM | 64MB | |||||
Frequency | 2.4GHz: 2400MHz-2484MHz | |||||
Standard | 802.11ac/b/g/n, 2T2R MIMO | |||||
Data Rate | 1200Mbps | |||||
Modulation | OFDM = BPSK,QPSK,16-QAM,64-QAM; DSSS = DBPSK,DQPSK,CCK | |||||
2.4G RF Power | 802.11b | 11M | 18±2DB | 1M | 20±2DB | |
802.11g | 54M | 17±2DB | 6M | 19±2DB | ||
802.11n HT20 | MCS7 | 16±2DB | MCS0 | 18±2DB | ||
802.11n HT40 | MCS7 | 15±2DB | MCS0 | 17±2DB | ||
5G RF Power | 802.11a | 54M | 17±2DB | 6M | 20±2DB | |
802.11n HT20 | MCS7 | 16±2DB | MCS0 | 19±2DB | ||
802.11n HT40 | MCS7 | 15±2DB | MCS0 | 19±2DB. | ||
802.11ac HT80 | MCS9 | 14±2DB | MCS0 | 17±2DB | ||
2.4G Receive Sensitivity | 802.11b | 11M | -85dbm | 1M | -94dbm | |
802.11g | 54M | -72dbm | 6M | -90dbm | ||
802.11n HT20 | MCS7 | -70dbm | MCS0 | -88dbm | ||
802.11n HT40 | MCS7 | -68dbm | MCS0 | -86dbm | ||
5G Receive Sensitivity | 802.11a | 54M | -74dbm | 6M | -90dbm | |
802.11n HT20 | MCS7 | -72dbm | MCS0 . | -88dbm | ||
802.11n HT40 | MCS7 | -68dbm | MCS0 . | -86dbm | ||
802.11ac HT80 | MCS9 | -58dbm | MCS0 . | -80dbm | ||
EVM | 2.4G: 802.11b: ≤-10dB; 802.11g: ≤-25dB ; 802.11n: ≤-28dB | |||||
Frequency Deviation | ±20ppm | |||||
Max Users | 325 | |||||
Size | 218*148*33MM | |||||
Interface | 3*10/100Mbps LAN ports | |||||
1*10/100/1000Mbps WAN port | ||||||
1*DC 12V 0.5A | ||||||
1*Reset button: Press in 10 seconds: reset to default settings; | ||||||
Operation Mode | Gateway, Sub-Node | |||||
LED Indicator | PWR(Power), WAN, LAN, NET(Ethernet) | |||||
Antenna | Build in 5dBi high-gain omni antennas | |||||
Power consume | <6W | |||||
Environment | Working Temperature: -30°C to 55°C | |||||
Storage Temperature: -40°C to 70°C | ||||||
Humidity:5%~95%(Non-condensing) |
Working Diagram: