ZHANGJIAGANG FLAME MACHINERY CO.,LTD. |
|
1. Introduction of Product
PVC profile production line is mainly
used in producing PVC profile, multi-hole cable duct (4-hole,
6-hole, 7-hole, 9-hole option). According to the different
sectional drawings and molds we can choose different conical or
parallel twin screw extruder and provide relative vacuum sizing
tank, haul-off, cutter, stacker auxiliary equipments. The capacity
of main by our special up-down technology with the advantages of
stable working, good reliability, heavy traction, etc. The vacuum
sizing tank adopts special extra-big whirlpool cooling system to
satisfy the cooling, shaping and high-speed extrusion. The moving
speed of cutter and drawing speed keep synchronous with PLC
controller, reasonable design, running stable, auto fixed length
cutting, assembled swarf suction device. According to the different
molds, the vacuum sizing tank can adopt 4m, 6m, 8m, 11m, etc. If we
use parallel twin screw extruder it will be suitable for high speed
extrusion of the profile.
2. Quick Detail:
This production is used to produce PVC
door/window profile, elbowboard, the decoration panel, multi-hole
wire- through pipe and other profiles. It main contents Plastic
Loader, Extruder, Mould, Vacuum Calibration Table, Haul-off, Cutter
and Stacker. It can produce different sections and thickness of
profile by changing the type of machine and mould.
3. Description:
After the line add or replacing the different
spare part, can be produced plastic steel window profile, pinch,
plate, window sill, siding plate, corrugated sheets and wpc of
floor, fences, door panel, door pocket, lines etc.
At present WPC extrusion line has two ways:
one step way and two steps way: one step way mainly used to produce
PVC wood plastic product, two steps way mainly used to extrude
PP/PE wood plastic product. The screws and barrel is treated by
bimetal treatment, wearable and anti-erode, featured in good
plasticization, high capacity, energy saving and wood powder and
the other wooden fibre can occupied high quantity as 50-70%. This
equipment is an ideal choice for customers who want to produce wood
tray, indoors and outdoors floor, fences, warehouse plate and
outdoors decorative material and so on.
3. Applications:
4. Specifications:
Extruder Model | SJZ55/110 | SJZ65/132 | SJZ80/156 | SJZ92/188 | ||
Main motor power(Kw) | 22 | 30 | 55 | 110 | ||
Down-stream Equipment | YF240S | YF240A | YF300A | YF600 | YF900 | YF1200 |
Product width(mm) | Max240 | Max240 | Max300 | Max600 | Max900 | Max1200 |
Vacuum pump(Kw) | 2×5.5 | 4×5.5 | 4×5.5 | 4×5.5 | 1×7.5 | 1×7.5 |
Water pump(Kw) | 1.5 | 4 | 4 | 7.5 | 7.5 | 7.5 |
Haul-off speed(m/min) | 0-5 | 0-5 | 0-5 | 0-3 | 0-2.5 | 0-5 |
Down-stream Equipment power(Kw) | 22 | 35 | 35 | 44 | 25 | 62 |
Output(kg/h) | 100 | 220 | 220 | 350 | 350 | 750 |
5. Competitive Advantage:
Fetching in Europe and America advanced
technology and uniting with domestic condition, our company develop
this production line. It possesses the features such as novel
style, reasonable structure and friendly operation. The main
extruder in this line, manufactured by our company, matches with
auxiliary machines and die head. This production can realize full
automatic control from feeding to staking. Meanwhile each machine
can be regulated manually. It possesses the advantages such as high
elasticizing capacity, low energy consumption, high productivity
performance cost value and long life. It’s the best selecting
equipment to produce all kinds of plastic profile.
6. Service:
1. Oversea installation guide.
2. Oversea test running
3. Ovsersea worker training
4. Technical support
5. Spare parts supply
6. Technical operation support
7. Formula and processing support
7. Option
The main extruding machine adopts
special-designed screw, barrel, mould, Equipped with the auxiliary
machineries, it could produce the PP/PE/PVC wood-plastic products,
It’s a new environment-protecting product, which combines the wood
powder and plastic powder at a certain percent. After the high
temperature and mould extruding, the wood and plastic composites
and becomes the final products.
8. Commercial Terms
1.Payment: 30% by T/T as advance payment, balance(70%) by
T/T before shipment
2.Lead Time: 60 days after receiving the advance payment
3.Transportation: container, simple package ( PE film, salver)
4.Warranty period: From the day of the use of the machine in the
buyer’s factory:
(1) The mechanical Parts: 12 months
(2) The electrical Parts: 6 months
5. Installations and Commissioning
(1) Up to date commissioning has been made before
shipment
(2) Overseas Commissioning and charges
one or two technicians will be sent to the buyer to
guide the installation and commissioning of the
equipment if the
customer requests.
Customers pay the charge of our technicians.
(1) Round-trip Airplane Ticket
(2) Charges of transportation, accommodation and
communication
(3) The allowance for the technicians is USD 80 per
day for one person.
(4) An interpreter is needed.
6. Spare parts:
Spare parts for one year are needed for the
customers, and we suggest that customers should buy the
spare parts. (Fittings list will be provided.)
7. English manual, Figuration drawing, and footing drawings
are provided.