Home Companies Jinan Lijiang Automation Equipment Co., Ltd.

300kg 400kg 500kg 900kg Vacuum Pump Glass Lifter Vacuum Glass Lifting Equipment

Contact Us

[China]

Trade Verify

Address: Block B 1307, Green Square, Huaiyin District, Jinan China

Contact name:Rose

Jinan Lijiang Automation Equipment Co., Ltd.

Verified Suppliers

Trust
Seal
Verified
Supplier
Credit
Check
Capability
Assessment

300kg 400kg 500kg 900kg Vacuum Pump Glass Lifter Vacuum Glass Lifting Equipment

Country/Region	china
City & Province	jinan shandong

Product Details

Various specifications glass vacuum lifting equipment

Product Description :
glass vacuum lifter

hoist lifting equipment

glazing lifting equipment

vacuum lifts hoists

mobile vacuum lifter

suction lifting devices

glass curtain wall installation

vacuum lifting equipment

glass vacuum lifting equipment

glass lifting devices

glass lifting equipment

suction lifting equipment
Manual rotation: 360° edgewise, with locking at each quarter point.
Manual tilt: 90° between upright and flat, with automatic latching in upright position.
Suitable for moving insulating glass /tempered glass/glass curtain wall, on -site construction of glass deep processing and solar photovoltaic glass.
Glass lifter has the max weight of 300kg / 400kg / 500kg / 900kg and so on, the max glass weight can be chose. The glass crane with column and suckers.

Parameters:
Mode
LJXPD400
LJXPD500
LJXPD600
Cap
400KG
500KG
600KG
Suction Pad Dia
300mm
300mm
300mm
Suction Pad Qty
4PCS
6PCS
8PCS
Dimension(L*W*H)
900*730*240mm
1800*1190*240mm
1800*1190*240mm
Rotation
Manual360°
Manual360°
Manual360°
Turn over
Manual90°
Manual90°
Manual90°
Voltage
DC12V
DC12V
DC12V
Charging Voltage
110V/220V
110V/220V
110V/220V
Net Weight
110KG
110KG
110KG
Package Size
950*950*400mm
950*950*400mm
950*950*400mm
Cross Weight
130KG
140KG
150KG
Max Loading Size
4000*2000*20mm
5000*2000*20mm
6000*2000*20mm
NOTE:
Considering the effect of plate span and gravity for reference
only.
Advantages&Benefits
 
Features & Advantages
●Mechanical part:
 
(1) The total length of the main beam of the suction hoist is
designed to be 2000mm, and the upper part of the middle part is
welded and sealed with a plate, and the middle part is used as a
vacuum accumulator. The air tightness test is carried out after
welding to ensure no leakage. When the equipment is suddenly
powered off, it is still guaranteed to be able to reliably adsorb
the plates for at least 20 minutes, and will not cause safety
accidents such as equipment damage (the European CE standard is to
maintain 10 minutes)
 
(2) This equipment is equipped with 6 suction cups with a diameter
of 360mm for different sizes of glass. The position of each suction
cup on the beam is adjustable to facilitate the adsorption of glass
of different sizes.
 
●Electrical part:
 
(1) A vacuum pressure switch and a buzzer alarm unit are installed
on the vacuum hoist. When the vacuum system pressure does not reach
the set pressure, or when a power failure occurs, the alarm unit
will control the red warning light to light up and the buzzer to
sound, Prompt the operator to deal with it in time.
 
●Vacuum part:
 
(1) The suction hoist adopts a German oil-free rotary vane vacuum
pump, with a pumping capacity of 8m3/h, a large vacuum degree of
over 85%, energy saving, compact and lightweight, no maintenance,
etc.;
 
(2) The whole set of equipment is equipped with 6 vacuum suction
cups, multi-point adsorption to ensure that the plate can maintain
a high level during the handling process without tilting;
 
(3) The suction cup material is nitrile rubber, with a diameter of
360mm, oil (benzene), durable, acid and alkali resistance, and can
effectively adsorb with FRP to produce a true single suction cup
level. Theoretical large suction force = effective area (physical
product * coefficient) * calculated pressure (0.6bar);
(0.18*0.18*3.14)*0.6*10000=610.416, which is approximately 610.4Kg.
According to the 4 times safety factor, the actual allowable
suction power of the suction cup is 610.4/4=152.6Kg. The total
suction power of 6 suction cups is 600kg. Note: The vacuum suction
force mentioned in the above table is calculated under 60% vacuum
degree. Under normal working conditions, the system vacuum degree
can reach more than 85%;
 
(4) The vacuum pressure sensor is made of Japanese Panasonic brand,
and the alarm pressure level is set to 60% vacuum;
 
(5) Each suction cup is equipped with a manual ball valve to
control the opening and closing, which ensures that the same
equipment can be applied to various specifications of plates;
 
(6) The upper and lower parts of the sucker rod are equipped with a
spring. When the plate is not flat, the spring acts as a buffer to
make the sucker evenly stressed, so as to ensure the safety and
reliability of the suction cup.
 
● Overall
 
2. According to the European Union DIN EN 13155 vacuum system
design for the outdoor building curtain wall installation site.
 
3. Horizontal handling, electric flipping and vertical handling.
 
4. Flexible design, can be applied to the handling of different
sizes of FRP.
 
Tag:mechanical vacuum lifter,hoist lifting equipment,glass vacuum lifting equipment
 

Hot Products

2-35m/min Low E Glass Making Machine Glass Loading And Unloading

Vacuum Suction Loader LJLSP Automatic Insulating Glass Loading Machine Insulating Glass Processing ...

Jumbo Size Double Glazing Insulating Glass Production Line For Washing And Pressing

Jumbo size Double Glazing Insulating Glass Production Line For Washing And Pressing Main feature of ...

15mm / 19mm Automatic Insulating Glass Production Line Machine

Vertical Insulating Glass Production Line LJBZ2535 • Glass washing part Main feature Of washing ...

Double Glazing Insulating Glass Production Line Jumbo Size 3300*7000mm

Jumbo size 3300*7000mm Double Glazing Insulating Glass Production Line For Washing And Pressing ...

High Speed Processing Hollow Glass Production Line Automatic Cleaning And Drying

Automatic Vertical Insulating Glass Production Line with Gas Filling Automatic Vertical Insulating ...

Intelligent Insulating Glass Processing Machine Can Cooperate With Various Departments

1, To Avoide the low-e Glass put inverse side and Leave wheel marks or scratch low-e Coating We use ...

Related Products

Mode	LJXPD400	LJXPD500	LJXPD600
Cap	400KG	500KG	600KG
Suction Pad Dia	300mm	300mm	300mm
Suction Pad Qty	4PCS	6PCS	8PCS
Dimension(LWH)	900730240mm	18001190240mm	18001190240mm
Rotation	Manual360°	Manual360°	Manual360°
Turn over	Manual90°	Manual90°	Manual90°
Voltage	DC12V	DC12V	DC12V
Charging Voltage	110V/220V	110V/220V	110V/220V
Net Weight	110KG	110KG	110KG
Package Size	950950400mm	950950400mm	950950400mm
Cross Weight	130KG	140KG	150KG
Max Loading Size	4000200020mm	5000200020mm	6000200020mm
NOTE:	Considering the effect of plate span and gravity for reference only.