|
[China]
Trade Verify
Address: Block B 1307, Green Square, Huaiyin District, Jinan China
Contact name:Rose
Jinan Lijiang Automation Equipment Co., Ltd. |
|
Verified Suppliers
|
|
|
Glass vacuum suckers lifter with Remote Control for glass lifting
Manual rotation: 360° edgewise, with locking at each quarter point.
Manual tilt: 90° between upright and flat, with automatic latching in upright position.
Features of glass lifting equipment
1. The vacuum pump, valve, switch and some important spare parts we are import from oversea.
2. Stable performance, easy to maintain, efficient, safe, quick, easy.
3. The material of suction pad is NBR (oil resistance,skid resistance, corrosion resistance) , Be able to effectively and steel vacuum suction and produce vacuum.
4. The vacuum glass lifter is for handling the glass sheet.
5. Glass lifter max. carrying capacity 200kg. 400kg. 600kg.800kg ( a safety factor 4.0 include).
6. The suction pad can be adjustable, can be turned off and open individually.
7. The vacuum lifter is equipped with a buzzer and warning light units, in case of a power failure or vacuum leakage, an optical and an acoustic signal goes off immediately to warn the operator to do emergency operation.
8. The design of vacuum lifter by our company is passed to EU CE passed.It is CE identification product.
9. The vacuum lifter is equipped with safety tank&Pressure switch warning, when the power is turned off in sudden, always can keep the work piece not falling down for 30 minutes.
Application
- Insulating Glass Production line,
- Installing Glass Curtain Wall System,
- Loading and Unloading glass sheet on glass cutting table,
- Instaling car windscreen.
Related Product
Automatic Aluminum Spacer Bending Machine
Main feature of spacer bending machine
• Automatically cut and feed aluminum spacers
• Adopt Siemens PLC control system, touch screen interface
• Automatically avoid the connection while bending and cutting
• Siemens servo control system
• Four spacer size storage units
• Auxiliary function of adjustment for bending large aluminum frame
• Aluminum spacers are available in different sizes and sizes
• Bend shaped spacer frames continuously
• Separated guard board outside of bender
• Pause and Reset device for handling equipment failures
• Can bend aluminum spacer and stainless steel ( Optional)
• USB input function, read the excel format file directly etc (Optional)
• Spacer printing code function (Optional)
• Printing label sticker function (Optional)
• Automatic drill gas filling hole (Optional)
• Connect to ERP system (Optional)
Technical data of Aluminum spacer bending machine
| Max. bending size | 2000mm*2000mm |
| Min. bending size | 250mm*200mm |
| Aluminum spacer width | 5.5-27mm |
| Dimensional error | ±0.5mm |
| Angle error | ±1º |
| Processing speed | ≤26s |
| Air supply | ≥0.65MPa |
| Total power | AC220/380V 50Hz 2.5KW |
| Dimension | 10500mm*2200mm*2600mm |
