|
[China]
Trade Verify
Address: 1st Floor, B Block, Jiada R&D Building, Nanshan, Shenzhen, China
Contact name:Dieky Lin
Shenzhen Chuangyin Co., Ltd. |
|
Verified Suppliers
|
|
|
Plug In Bushing 35KV 800A Indoor GIS EN 50180-50181 Cross Section 50-240mm
1. Introduction:
Plug-in Termination Kits is suitable for GIS incoming and outgoing
wire connection. It is designed to mate with epoxy insulated
bushing, and connect wire to switchgear fully shielded, fully
insulated, fully sealed. Your technician can install, repair or
maintain equipment and power cable system without undermining seal
between bushing and GIS.
Meets the standard of EN50180-50181 interface type 2#,
2.Packing:
Termination housing
Locking halves
Protection cover
Cable Sheath Braided Ground Wire
CFS
Wipers
Installation instruction
Silicone Grease
Certificate
3.Structure:
1.Epoxy Insulated Bushing
2.Locking Halves
3. Stress Relief Cone
4. Plug-in termination kit
5. Protection cover
6. pressure spring
7. Cable sheath
8. Grounding Wire
9. Cable Cable not included
4. Parameters:
| Part number | 2# | 3# |
| Voltage ratings | 35kV | 35kV |
| Rated current | 800A | 1250A |
| AC withstand voltage 5 min | 117kV | 117kV |
| DC withstand voltage 15 min | 104kV | 104kV |
| PD at ambient temperature | 45kV10pC | 45kV10pC |
Impulse voltage at elevated temperature | 200kV | 200kV |
| Cross section | 50 〜240mm2 | 50 〜630mm2 |
5. Selection Table:
| Part No. | 3# | |
| Dimensions | L1mm | 147.5 |
| L2mm | 216 | |
| <pDmm | 55 | |
| Installation | Bushing position 1mm | 113 |
| n | 6 | |
| 22mm | 130 | |
| N | 3 | |
Model Option:
| Model | Part No. |
| Plug-in Bushing 2# | CYS-NC-3 |
