|
[China]
Trade Verify
Address: 1st Floor, B Block, Jiada R&D Building, Nanshan, Shenzhen, China
Contact name:Dieky Lin
Shenzhen Chuangyin Co., Ltd. |
|
Verified Suppliers
|
|
|
We are manufacturer for Plug-in Type Connector Series
1) 35kV, 2# and 3# Plug-in Termination Kits. For GIS.
2) 35kV, 2# and 3# Plug-in Bushings. For GIS.
3) 35kV, 2# Plug-in Connector for Potential Transformer. For
GIS.
Plug-in Type Connector Series
35kV, 2# and 3# Plug-in Termination Kits
Application:
Chuangyin® Plug-in Termination Kits is widely applicable for connecting cables to GIS (Gas Insulated Switchgear). It is designed to mate with epoxy insulated bushing fully shielded, insulated, and sealed. Without undermining seal between bushing and GIS during installation, repairing or maintenance.
The interface designed to comply with EN 50180 / EN 50181 interface type 2#, 3# and IEC 60228, IEC 60502 etc.
Features:
Made of silicone rubber with high elasticity, weather proof, aging resistance
Fully shielded
Used in indoor and outdoor
Compact design
100% factory tested
In compliance with IEC 60228
Construction:
1. Epoxy Insulated Bushing
2. Locking Halves
3. Stress Relief Cone
4. Plug-in Termination Kit
5. Protection Cover 6. Pressure Spring
7. Cable Sheath 8. Grounding Wire
9. Cable
Technical Data:
| Interface Type | 2# | 3# |
| Voltage Class | 35 kV | 35 kV |
| Rated Current | 800 A | 1250 A |
| AC Withstand Voltage 5 min | 117 kV | 117 kV |
| DC Withstand Voltage 15 min | 104 kV | 104 kV |
| Partial Discharge | 45 kV, ≤10 pC | 45 kV, ≤10 pC |
| BIL | 200 kV | 200 kV |
| Cross Section | 50 – 240 mm2 | 50 – 630 mm2 |
Kit Contents:
Plug-in Termination Kit Locking Halves
Protection Cover Cable Sheath
Braided Ground Wire CFS
Wipers Installation Instruction
Silicone Grease Certificate
Ordering Instructions:
| Product | Part Number | Cross Section (mm2) | Diameter over insulation (mm) | Code |
| 2# Plug-in Termination | CYS-CBN2(01)-35-50 | 50 | 30 - 32 | A |
| CYS-CBN2(01)-35-70 | 70 | 32 - 33.4 | B | |
| CYS-CBN2(01)-35-95 | 95 | 33.6 - 35.1 | C | |
| CYS-CBN2(01)-35-120 | 120 | 35 - 36.6 | D | |
| CYS-CBN2(01)-35-150 | 150 | 36.4 - 38.1 | E | |
| CYS-CBN2(01)-35-185 | 185 | 37.8 - 40 | F | |
| CYS-CBN2(01)-35-240 | 240 | 40 - 42 | G | |
3# Plug-in Termination
| CYS-CBN3(01)-35-50 | 50 | 30 - 32 | A |
| CYS-CBN3(01)-35-70 | 70 | 32 - 33.4 | B | |
| CYS-CBN3(01)-35-95 | 95 | 33.6 - 35.1 | C | |
| CYS-CBN3(01)-35-120 | 120 | 35 - 36.6 | D | |
| CYS-CBN3(01)-35-150 | 150 | 36.4 - 38.1 | E | |
| CYS-CBN3(01)-35-185 | 185 | 37.8 - 40 | F | |
| CYS-CBN3(01)-35-240 | 240 | 40 - 42 | G | |
| CYS-CBN3(01)-35-300 | 300 | 42.4 - 44.3 | H | |
| CYS-CBN3(01)-35-400 | 400 | 45 - 47.4 | I | |
| CYS-CBN3(01)-35-500 | 500 | 48.4 - 50.3 | J | |
| CYS-CBN3(01)-35-630 | 630 | 52.4 - 54.3 | K |
Dimensions:
| Interface Type | 2# | 3# | |
| Outline | L1 (mm) | 125 | 147.5 |
| L2 (mm) | 140 | 216 | |
| Conductor | φD (mm) | 39 | 55 |
| Installation | Installation Position for Bushing Φ1 (mm) | 107 | 113 |
| Number of Installation Hole n (pcs) | 3 | 6 | |
| Installation Position for Termination Φ2 (mm) | 102 | 130 | |
| Number of Installation Hole N (pcs) | 3 | 3 | |
Technical Data:
| Interface Type | 2# | 3# |
| Voltage Class | 35 kV | 35 kV |
| Maximum System Voltage (Um) | 42 kV | 42 kV |
| Rated Current | 800 A | 1250 A |
| AC Withstand Voltage 5 min | 117 kV | 117 kV |
| Partial Discharge | 45 kV, ≤10 pC | 45 kV, ≤10 pC |
| BIL | 200 kV | 200 kV |
Ordering Instructions:
| Product | Part Number |
| 2# Plug-in Bushing | CYS-NC-2 |
| 3# Plug-in Bushing | CYS-NC-3 |
Technical Data:
| Item | Parameters |
| Voltage Class | 35 kV |
| AC Withstand Voltage 5 min | 117 kV |
| DC Withstand Voltage 15 min | 104 kV |
| Partial Discharge | 45 kV, ≤10 pC |
| BIL | 200 kV |
Kit Contents:
Plug-in Connector for Potential Transformer
Stopper Ring
Locking Halves
Wipers
Silicone Grease
Installation Instruction
Certificate
Ordering Instructions:
| Product | Part Number |
| 2# Plug-in Connector for Potential Transformer | CYS-NPT2(01)-35 |
Kindly Note:
Our Factory Products Catalog as Follow:
I. Instrument Transformer(Epoxy Resin Type, upto72.5kV)
i. LV & MV Current/Voltage Transformer
ii. Electronic Instrument Transformer/LPIT/Sensor Split Core
Current Transformer/Rogowski Coil
iii. Split Core Current Transformer/Rogowski Coil
II. Cable Accessories(EPDM, upto42kV)
i. Separable Connector IEC/IEEE
ii. Busbar Connection System
iii. Switchgear Insulation Components
iv. Cold Shrink Cable Accessories
Thanks!
Welcome to Chuangyin(CY)!
Hope a nice shopping time!
