Shenzhen Chuangyin Co., Ltd. |
Verified Suppliers
|
|
15kV Indoor Busbar Connection System Type Medium Voltage For The Combined Connection
1. Introduction:
Chuangyin® Bus-bar Connector is widely applicable for the combined
connection of ring main units (RMU), gas insulated switchgear (GIS)
to supply more branches for expansion, which electrically insulate
and mechanically seal the connecting busbar and switchgear.
The interface designed to comply with EN 50180 / EN 50181 interface
type C and HD 629.1, IEC 60502.4, GB/T 12706.4 etc.
Following are some of Chuangyin® products of 15 kV and 35 kV sc r
ee ne d/ u n s c r ee ne d. C us t o m i ze d p ro du ct s ar e a
va i l ab le according to different requirements.35kV top busbar
connector used in GIS system switchgear busbar connection system,
mainly by the T-joint,
cross connector, shield bus composition, to achieve the switchgear
of the insulated, fully shielded, fully
sealed connection, completely avoid the high pressure exposed Bad
weather brought about by the fatal flaws and the installation is
simple, high reliability.
2. Technical Data:
Item | Parameters |
Voltage Class | 35 kV |
Rated Current | 1250 A |
AC Withstand Voltage 1 min | 95 kV |
Partial Discharge | 45 kV, ≤10 pC |
BIL | 200 kV |
Screen Resistance | ≤ 5000Ω |