Home Companies instankoservice limited

ATS-2513.Automatic 3-Axis CNC machines

instankoservice limited

ATS-2513.Automatic 3-Axis CNC machines

Country/Region China

Product Details

Technical parameters:

Travelling area25001300250 mm
Table size2530 mm1310 mm
Transmission XYZhelical rack / ball screw
Table structureT-Slot or HDPVC vacuum table
Spindle speed24000 rpm
SpindleATC 4.5 kW
Speedmax travelling speed25 m/min
max working speed15 m/min
MotorsServo motors
Working voltageAC 380V / 3PH / 50 Hz
CNCE.CNC
Net weight1130 kg
Guideways. ATS” machine type series use profile guide rails on all axes. The linear guideway can achieve high precision linear motion, low coefficient of friction, and high bearing capacity due to the use of re-circulating rolling elements between the rail and the block. These linear guideways can greatly enhance moving accuracy and high quality of milling.
Ball screw. Precision ballscrews by HIWIN (Taiwan) are installed in CNC ATS-2513.4D” to provide high stiffness and accuracy of machine joints. HIWIN lead screws has such characteristics as stiffness, reversibility, and lead accuracy which guarantee high efficiency of milling.
Helical gear rack. Helical gear rack by YYC” (Taiwan) is used in mechanics of axes moving. Due to quality of production this gear rack has high precision and low noise level.
Planetary gear. It is used to reduce to minimum backlashes in the mechanics of the machine. It is the best decision for this type of the machines. The machine has precision movements on the axes X” and Y” due to combined operation of motor, reducer, and rack.
Spindle. The TS-2513.4D” machines are equipped with industrial spindle, which power is 4,5 kWt, made by Italian producer HSD”. Precise bearings, used in the spindle, provide long operational life.
Toolholders. If you install automatic tool change spindle in TS-2513.4D”, you receive four toolholders ISO30 for collet ER 32. We use only high quality and correctly balanced collets and this insures long term of spindle operational life.
Braking resistor. If we install the automatic tool change spindle in TS-2513.4D”, we install braking resistor to stop quickly main spindle as well. It greatly saves time on the tool changes.
Tool sensor. This device exists to optimize the use of various tools in the machine. It automatically defines the length of tools.
Vacuum table. It is used for quick and reliable fixation of work stock, which is made of high density PVC. A powerful vacuum pump holds firm sheet material on the surface of work table. Positioning of work piece is carried out by pneumatic stops which are controlled by operator or work in automatic mode.
CNC system. CNC is in the control of paths of motion and movements of the machine. ATS-2513.4D” is equipped by reliable and reputable CNC system ECNC (Germany). It is modern controller of high consistency and reliability rate.
MPG(Handwheel). Remote control handwheel is used for the convenience of the operator. The handwheel is able to move around and suited for the manual control of the machine axes. The handwheel has emergency stop button.
Control box. The control box is mobile due to small wheels so the operator can move and adjust it freely. The control box is fitted with electronic engineering parts. The control box has cooling which improves working conditions of the electronic parts.

Hot Products

This machine is right for production of master molds, complex furniture constituents, automotive and ...
Technical parameters: Travelling area 21001200250 mm Table size 2120 mm1200 mm Transmission XYZ ball ...
Technical parameters: Travelling area 25001300250 mm Table size 2530 mm1310 mm Transmission XYZ ...