AddThis Sharing Buttons
Share to FacebookFacebookShare to TwitterTwitterShare to Google+Google+Share to PinterestPinterestShare to LinkedInLinkedInShare to ...Addthis
Multi-cartridge Filter Millipore Membrane Filter
Multi cartridge filter Introduction Multi cartridge filter, which
is made of stainless steel shell and filter element, is widely used
in industrial applications. The raw water is filtered through the
filter cartridge, and the particles in the raw water are trapped in
the outer surface of the...
Multi cartridge filter Introduction
Multi cartridge filter, which is made of stainless steel shell and
filter element, is widely used in industrial applications. The raw
water is filtered through the filter cartridge, and the particles
in the raw water are trapped in the outer surface of the filter
element, thus it will achieve the purpose of filtration
Membrane process uses the technology and the most advanced
production equipment to provide various kinds of high performance,
high quality micro porous membrane filtration system for customers
Filter uses reasonable fluid mechanics technique, in accordance
with GB150-1998 < steel pressure vessel during water treatment
equipment design, manufacture ,inspection and acceptance >.
Safe operating temperature and pressure will depend on elements and
sealing ring if greater than the pressure and temperature, please
noted in particular.
Acceptance criteria: design and manufacture of steel pressure
vessel, water treatment filter criteria, "U ASME".
INOCO can supply more than 1900 choose equipped with stainless
steel cartridge, PP, PTFE folded nearly 100 kinds filter cartridge,
all kinds of select can meet different conditions and reduce your
cost. We hope every device can fully meet all design requirements.
Filter accuracy :0.003 micron~100 micron
Cartridge material: Natural cotton, polyester, polypropylene,
nylon, stainless steel
Cartridge kinds: melt blow, folded
Replacement of filter element: when the pressure difference between
upstream and downstream is greater than 0.2mpa, the filter element
needs to be replaced when the filtrate flow rate is 30% less than
the initial stage.
CS 20# ,SS304,SS316L,2205, Alloy, Lined PP, Coating PTFE
melt blown ,fiber glass, PP, PTFE, Stainless steel
Gasket for body
Buna-N (standard),EPDM,Viton , PTFE
|Gasket for cartridge|
0.003 micron~100 micron
Design flow rate
Quantity for cartridge