Home Companies Anhui Innovo Bochen Machinery Manufacturing Co., Ltd.

Corrugated 1500x1500mm Fully Automatic Flute Laminator

Anhui Innovo Bochen Machinery Manufacturing Co., Ltd.

Contact Us

[China] country

Trade Verify

Address: No 31 Zhongning Road, Mingguang City, Anhui Province, China

Contact name:Tracy Feng

Inquir Now

Anhui Innovo Bochen Machinery Manufacturing Co., Ltd.

Verified Suppliers
  • Trust
    Seal
  • Verified
    Supplier
  • Credit
    Check
  • Capability
    Assessment

Corrugated 1500x1500mm Fully Automatic Flute Laminator

Country/Region china
City & Province anhui
InquireNow

Product Details

Corrugated Litho Laminator Fully Automatic Machine

 

INTRODUCTION:

1.1 Function:

The paper can be laminated with paperboard to increase the strength and thickness of the material or special effects. After the die-cutting, it can be used for packaging boxes, billboards and other purposes.

 

1.2 Structure:

A. Top sheet Feeder: It can send stacks of 120-800gsm paper from above.

B. Bottom sheet feeder: It can send 0.5~10mm Corrugated/paperboard from below.

C. Gluing mechanism: The glued water can be applied to the fed paper. Glue roller is stainless steel.

D. Calibration structure-Fits the two papers according to the set tolerances.

E. Pressing Conveyor: Presses the attached paper and conveys it to the delivery section.

The frames of this series of products are all processed at one time by a large-scale machining center, which ensures the accuracy of each station and ensures more stable operation of the equipment.

 

1.3 Principles:

The top sheet is sent out by the upper feeder and sent to the start detector of the positioning device. Then the bottom sheet is sent out; after the bottom paper is coated with glue, the top paper and the bottom paper are respectively conveyed to the paper Synchronous detectors on both sides, after the detection, the controller calculates the error value of the top and bottom sheet, servo compensation device on both sides of the paper adjusts the paper to a predetermined position for splicing, and then pressurizes the conveying. The machine presses the paper and conveys it to the delivery machine to collect the finished product.

 

1.4 Applicable materials for laminating:

Paste paper --- 120 ~ 800g/m thin paper, cardboard.

Bottom paper---≤10mm corrugated ≥300gsmpaperboard, single-sided cardboard, multi-layer corrugated paper, pearl board, honeycomb board, styrofoam board.

Glue - resin, etc., PH value between 6 ~ 8, can be applied to the glue.

 

 

Parameters:

 

ModelZGFM 1500ZGFM 1700
Max size1500*1500mm1700*1700mm
Min size360*380mm360*400mm
Top Paper120-800g120-800g
Bottom paper≤10mm ABCDEF corrugated board ≥300gsm cardboard≤10mm ABCDEF corrugated board ≥300gsm cardboard
Max speed150m/min150m/min
Power25kw27kw
Stick accuracy±1mm±1mm
 

 

Structural features:

Adopting the world's leading transmission control system, input paper size and system will auto-tuning

Computerized high-speed laminating, up to 12,000 pieces per hour.

Stream-type air supply head, with four sets of forward nozzles and four sets of suction nozzles.

Feed Block adopts low stack cardboard, which can fit the paper to the pallet, and can install track-assisted pre-stacker

Use multiple sets of sensors to detect the advance position of the bottom line, and make the servo motor on both sides of the top paper to independently rotate to compensate the upper and lower paper alignment, which is accurate and smooth.

Full-function electronic control system, using human-machine interface and PLC program model display, can automatically detect operating conditions and work records.

Automatic glue replenishment system can automatically compensate for lost glue and cooperate with glue recycling.

ZGFM high speed laminating machine can be connected with automatic flip flop stacker to save labor.

 


 

1.BOTTOM SHEET FEEDING

Use imported Servo motor controlling system, with Japan NITTA suction belt and big air blower to ensure smooth feeding of 2ply, 3ply, 4ply, 5ply and cardboard.

 

2.TOP SHEET FEEDING MECHANISM

Both paper lifting and feeding nozzle of high speed auto dedicated feeder can be freely adjusted to be adapted to both thin and thick paper. Together with Becker pump, ensure top feeding paper run fast and smoothly.

 

3.ELECTRICAL SYSTEM

Designed and adopt U.S.A Parker motion controller together with Yaskawa Servo system and inverter, Siemens PLC to ensure machine run at max. speed and accuracy as premium performance and running stability.

 

Hot Products

High Speed Flute Laminator Machine For Paper Packing 20KW Product Description: Principles: The top ...
Performance characteristics ● This machine can laminate combination of two corrugated boards and any ...
Automatic 5ply High Speed Flute Laminator Machine 1500x1500mm Performance characteristics ● This ...
Automatic Three in One High Speed Flute Laminator Machine 1500x1500mm Performance characteristics ● ...
High speed intelligent 3-in-1 5 layer laminating machine 1. Performance characteristics 1. This ...
Fully automatic intelligent corrugated cardboard flute litho laminator for corrugated box Performanc...