|
[China]
Trade Verify
Address: No 20 Tianshun Road, Yangshan Town, Huishan District, Wuxi, Jiangsu
Contact name:Maggie Zhang
OUCO (Wuxi) Injection Molding Machinery Equipment Co., Ltd. |
|
Verified Suppliers
|
|
|
The series hybrid injection molding machine is based on
all-electric injection molding machine (injection rate: 500mm/s;
put into production in 2009) and high-speed machine (put into
production in 2012). It combines with the clamping parts of the
high-speed machine and the injection parts of the all-electric
machine, taking into account the need for energy saving and
environmental protection. It meets the requirements of this product
for large clamping force and high performance injection unit. (Mold
opening and filling are performed simultaneously.)
Product Description
1. Modular injection unit with excellent acceleration performance
2. High-speed machine tool high stiffness clamping unit.
3. High response and low noise hydraulic system.
4. Optimized control system with good response and accuracy for
hybrid motors
Product Parameters
| Model | 500T | 600T | 70 0T | |||||||
| A | B | C | A | B | C | A | B | C | ||
| Screwdi ameter | mm | 70 | 75 | 85 | 75 | 85 | 90 | 85 | 90 | 100 |
| Screw L/Dratio | 22 | 22 | 22 | 22 | 22 | 22 | 22 | 22 | 22 | |
| Theoretical injection volume | cm3 | 1481 | 1700 | 2184 | 1788 | 2297 | 2575 | 2552 | 2861 | 3533 |
| Shot weight (PS) | g | 1377 | 1581 | 2031 | 1645 | 2113 | 2369 | 2348 | 2632 | 3250 |
| injection rate(Ps) | g/S | G03 | 693 | 890 | G13 | 788 | 884 | 788 | 883 | 1091 |
| Injection pressure | MPa | 209 | 182 | 142 | 204 | 159 | 142 | 209 | 187 | 151 |
| Inject on stroke | mm | 385 | 405 | 450 | ||||||
| Max. injection speed | mm/s | 166 | 157 | 147 | ||||||
| Screw speed | r/min | 0-200 | 0-200 | 0-180 | ||||||
| Sys. Pressure | MPa | 16 | 16 | 16 | ||||||
| Pump Motor(Min-Max) | kW | 94 | 101 | 114 | ||||||
| Displacement | ml/r | 125+125 | 160+125 | 160+160 | ||||||
| number of Motors | PC | 2 | 2 | 2 | ||||||
| Heater power | kW | 41 | 47 | 52 | ||||||
| Number oftemp. control zones | 5+1 | 5+1 | 5+1 | |||||||
| Clamping force | kN | 5000 | 6000 | 7000 | ||||||
| Opening stroke | mm | 1000 | 1150 | 1300 | ||||||
| Tie bar distance W×L | mmxmm | 860x760 | 960x860 | 1020x920 | ||||||
| Min. mold thickness | mm | 300 | 350 | 450 | ||||||
| Max. mold thickness | mm | 800 | 920 | 1050 | ||||||
| Ejector stroke | mm | 210 | 210 | 210 | ||||||
| Ejector force forward | kN | 110 | 113 | 113 | ||||||
| Number of ejector bar | PC | 1+12 | 1+12 | 1+12 | ||||||
| Oil tank capacity | L | 850 | 940 | 1020 | ||||||
| Machine dimensions(LxWxH) | mxmxm | 87x2.0x2.1 | 9.3x2.1x2.3 | 9.7x2.2x2.4 | ||||||
| Machine weight | Ton | 19 | 23 | 25 | ||||||
Detail Pictures
Company Profile
