|
[China]
Trade Verify
Address: No 20 Tianshun Road, Yangshan Town, Huishan District, Wuxi, Jiangsu
Contact name:Maggie Zhang
OUCO (Wuxi) Injection Molding Machinery Equipment Co., Ltd. |
|
Verified Suppliers
|
|
|
OUCO injection molding machine, made in China, takes customer's demand as the standard, focuses on design, is proficient in development, pays attention to production, and sells with precision. We can provide you with better customised service for injection molding machine, which can reduce your production cost, increase the added value of your products and improve your production efficiency.
Product Advantages
OUCO550T, with increased tie bar spacing, meets the application of molds for large sizes of bins and improves production efficiency. Centre clamping structure, clamping force 100%, the product is not easy to deform, high quality, long service life. Adopting injection, opening and closing double rails, the machine runs smoothly and the products are accurately molded.
Parameters
| MODEL | OCH-550T | |||||
| Clamping force (kN) | 5500 | |||||
| Space between tie bar (mm*mm) | 860*800 | |||||
| Max. mold thickness (mm) | 800 | |||||
| Min. mold thickness(mm) | 300 | |||||
| Opening stroke (mm) | 1010 | |||||
| Ejector stroke(mm) | 210 | |||||
| Ejector force forward(Kn) | 103 | |||||
| Screw diameter(mm) | 90 | |||||
| Screw L/D ratio | 22 | |||||
| Theoretical injection volume (cm3) | 2608 | |||||
| Shot weight (PS) g | 2519 | |||||
| Injection pressure(MPa) | 118 | |||||
| Injection speed (mm/s) | 133 | |||||
| Injection rate (g/s) | 817 | |||||
| Motor power (Kw) | 75 | |||||
| Oil tank capacity(L) | 850 | |||||
| Heater power (Kw) | 41 | |||||
| Machine Weight (t) | 20 | |||||
| Machine size L×W×H (m) | 8.7*2.1*2.2 | |||||
Detail Pictures
Company Profile
