|
[China]
Trade Verify
Address: Room 813, Building A, Jingshi Plaza, No.179 Yingbin Avenue, Huadu District, Guangzhou,China。
Contact name:Kinkor
King Inflatable Co.,Limited |
|
Verified Suppliers
|
|
|
Blue Outdoor Shadow Protection Blow Up PVC Tent Ad Printed Water
Toy For Water Park
Specifications:
| Item name | Inflatable beach tent for water park |
| Model No | king-wt177 |
| Material | 0.65mm PVC Tarpauline |
| Size | 4*4*3m or customized |
| Weight | depend on the size |
| Production time | 7 days after the deposit or depended on the design |
| Accessory | blower,repair kits, etc |
| Payment method | TT,Western Union with 50% deposit |
| Shipping way | By sea,by air,by courier, all are ok |
Quick Description:
1.Our Beach Tent creates an easily identifiable beach presence for your Water Park operators to register new guests, while providing shade from the sun. This tent is airtight products, need to inflated by air pump only one time. You can see each pipe with air valve, which is special for airtight products.
2.There are two material for airtight products, 0.65mm PVC
Tarpauline and 0.9mm PVC Tarpaulin. The material for beach
tent is 0.65mm PVC Tarpauline which from Plato factory. This
material is very strong and not easy to tear off.
3.OEM or ODM are ok,customer's design,logo,printing are ok.
4.Any question or problem,we will give you a response on time.
5.Good After-sale service, solve the problem in your position.
6.Size,colour,logo can be customized.
Our advantages:
1;King Inflatable Factory was establised in the year of 2012, but we have more than 10 years of experiences for the production of inflatables.
2;King Inflatable sale office in Guangzhou city was established in the year of 2012, now we have more than 5 years export experience.
3; We set up new factory in the year of 2013, it is 8000 Square meter.
4;Our Equipment :3 sets cutting machine, 1 set Japanese imported printing machine,1 set coated machine,50 sets sewing machine, 5 sets of Heat sealing machine.
How to repair the water park?
1. Find out exactly where the leak is. Fill a spray bottle with a mixture of soap and water and spray it liberally on the water sports along the seams. You will notice that the solution starts to bubble up where the leak is located, so take note of the position of the hole.
2. Prepare the hole for patching. Dry the seam off, and make sure that it is completely deflated before attempting to patch the seam. If you have the patch kit that came with the water sports, you can use the prep solution to thoroughly clean the rubber before proceeding. Rubbing alcohol also works.
3. Apply plumber's goop liberally to the seam and let it dry for about 15minutes. If possible, apply some goop to the inside of the seam as well, so that it spreads out and gives an extra layer of protection when the water sports pressurizes.
4. Inflate the water sports halfway with air and wait another 30minutes or so to make sure that the goop has dried completely.
