SHANGHAI YANYE INDUSTRIAL EQUIPMENT CO.,LTD |
Evapco Cooling Marley Cooling tower OPEN cooling tower BAC Open Cooling tower Cooling water Dirty water cooling :
1. The body of the tower is made of FRP (fiber reinforced
plastics), and its surface is bonded by gel coat resin, it has
aging-resistant, corrosion resistant and beautiful & smooth
surface etc characteristics.
2. The fan can be made of aluminum alloy or FRP, it has large wind
volume, low noise, high efficiency, stable running, long service
life etc characteristics.
3. The motor is the special motor which can be used outdoor, it has
energy saving, high efficiency etc properties, the speed reducer is
the special used for the cooling tower.
4. The filler is new type and high efficiency, it has water
distribution is uniform, small wind resistance and high temperature
resistant etc characteristics.
5. The steel support adopts advanced galvanization process, it has
excellent corrosion resistant property. 6. Because the cooling
tower can be installed by assembly, the volume of water treatment
can be increased manyfold, but the land which be used for the
cooling tower is small.
ITEM | Description | |
Summarization | Type | Square Cross Flow Open Cooling Tower |
Model | CLA-80B-1 | |
Quantity | 1 Units | |
Noise | Standard Low Noise Open cooling Type | |
Operating Conditions | Requested Flow Rate | 61.56 m3/h=17.1L/Sec |
Single Flow Rate Per Tower | 80 m3/h *1 Unit | |
Inlet Temperature | 35 ℃ | |
Outlet Temperature | 28 ℃ | |
Wet Bulb Temperature | 20 ℃ | |
Temperature Drop | 7 ℃ | |
Operation Work Pressure | 100.4kPa | |
Drift Rate | ≤ 0.001% | |
Structure | The Tower’s Dimension | 3500mm*1800mm |
Tower’s Height | 3650mm | |
Tower’s Quantity | 1 Units | |
Ventilator’s Quantity | 1 Unit/ per tower | |
Ladder | One side have the ladder | |
Access Door | One side have the door | |
Material of Construction | Upper Body | (F.R.P) |
Under Body | (F.R.P) | |
Water Pond | (F.R.P) | |
Water Sump Tank | (F.R.P) | |
Louver | (F.R.P) |
Tower Top | (F.R.P) | |
Water System | Q235-A Pickling, | |
Spray Nozzles | ABS | |
Spray Nozzles’s Type | ABS basket nozzles’s of umbrella style | |
Filling Material | Polypropylene | |
Filling Format | Waving Film cooling filling | |
Filling Kickstand | Q235-A Pickling, | |
Fillings Life Time | ≥ 15 years | |
Ladder And Safety Cage | Q235-A Pickling, | |
Nuts ,bolt, screw | 304 SS material | |
The Fastening pieces | 304 SS material | |
1,FAN SYSTEM | ||
Model | LF 15 | |
Diameter | Ф1500 | |
Quantity | 1 UNIT/ per tower | |
Type | Adjustable Axial Flow Fan | |
Driving | Belt Driven | |
Material | Alloy Aluminium | |
Fan’s Blade | 4 Pieces | |
Manufacturer | Zhejiangshangyu electrical motor co.,ltd | |
Wind Flow Rate | 7.2×104m3/h | |
2,Electrical Motor | ||
Model | Y132L-1 (water-proof motor) | |
Quantity | 1 Unit /per tower | |
Rated Power | 4.0 kW | |
Tum Speed | 700r/min | |
Protection Class | IP55 | |
Insulation Class | F | |
Power Nature | 380V/50HZ/3P | |
Manufacturer | Zhejiangshangyu electrical motor co.,ltd | |
3,Speed Reducer | ||
Model | B3-320 | |
Belt’s Type | B2235 |