AG Sonic Technology limited |
Verified Suppliers
|
|
Stainless Steel 316 Ultrasonic Vibration Transducer Generator With Vibrating Plate 2.5mm
Common Applications – Advantages of Immersible Ultrasonic Cleaning Transducers
Common configurations:
Since submersible ultrasonic boxes are most commonly added to existing stainless steel and other metallic based tanks, the boxes and ultrasonic power are made to fit such tanks. We can easily make our immersible ultrasonics into any tank configuration sizing required for your application with little to no additional custom size pricing.
AGsonic immersible ultrasonic transducer box-embedded in your existing tank.
good quality-custom made size-chemicals resistance-moveable-convenient install
AG series immersible ultrasonic transducer system includes transducer box and generator.
Specifications:
Model | Material | Transducers | Estimated volume | Box size | Cable lead-out | Ultrasonic frequency | Ultrasonic power |
(mm) | (pcs) | (L) | (mm) | (kHz) | (W) | ||
TZ-1003 | SUS304/SUS316L | 3 | 15 | 250x150x100 | Rigid tube/ Flexible tube | 28/40 | 150 |
TZ-1006 | 6 | 30 | 305x250x100 | 300 | |||
TZ-1012 | 12 | 60 | 355x250x100 | 600 | |||
TZ-1018 | 18 | 90 | 406x305x100 | 900 | |||
TZ-1024 | 24 | 120 | 500x355x100 | 1200 | |||
TZ-1030 | 30 | 150 | 550x406x100 | 1500 | |||
TZ-1036 | 36 | 180 | 500x460x100 | 1800 |
Brief Introduction of the immersible ultrasonic transducers:
Immersible ultrasonic transducers are sealed stainless steel
enclosures which allow for adding ultrasonics to parts cleaning new
tanks or adding onto existing tanks, equipment and systems.
The number and placement of the submersible ultrasonic cleaning
transducers is primarily determined by the volume of liquid in the
tank, geometric layout of the existing tank, and load size of the
parts. Depending on the size of the tank and parts cleaning
application, the Watts of ultrasonic power per gallon or Watts/gal
can vary from 30 to 100+ W/gal.
How to install the ultrasonic transducers:
The immersible ultrasonic transducers can be mounted on the sides or bottoms of the parts washing/cleaning tanks, depending upon their
geometry. In general, side mounting is recommended for tanks where
the depth is more than two times the smallest of the length / width
and side mounting the ultrasonics reduces the debris and foreign
material from settling on the top of the transducer box which will
reduce the ultrasonic effectiveness.
What to clean?
These submersible ultrasonics can be made in 25/28 kHz frequency,
for tough to clean parts like engine blocks and mold cleaning burnt
on carbon, and 40 kHz frequency for general parts cleaning
including precision machined components, in an agitated immersion
parts washer or stationary metal sided tanks. Immersibles are not
typically added to polypropylene, PVC, PVDF or other plastic based
tanks as the plastic absorbs the ultrasonic energy thereby reducing
the cavitation energy delivered to the part surface.
Features: