10 L Ultrasonic Circuit Board Cleaner , Small Ultrasonic Cleaner With Heater

Digital Timer And Heater Ultrasonic Cleaner 10 L Washer Machine For PCB

Ultrasonics, the Only Way to Thoroughly Clean Electronics

There is only one way to ensure that electronic devices and components are thoroughly cleaned, decontaminated and ready to be returned to service; and that way is with Ultrasonics.

With Ultrasonics, dirt, grease, bacteria, soot and any other contaminants are completely removed from the item with no loss of performance. In fact, with proper training, most items can be cleaned in less than two minutes and returned to service as soon as drying is complete.

Yes, You CAN Clean Electronics in Water!

You may have noticed that the computer monitor in the picture above is being cleaned in an Ultrasonic water bath. The gentle cleaning action of Ultrasonics, combined with proper training and drying, water will NOT damage electronics.

Electronics are Everywhere
And Electronics Cleaning is BIG Business

Electronics and electrical appliances become very dirty with continued use. If not maintained properly electronics will begin to malfunction. As dirt builds up, fans in computers will not cool the unit sufficiently, television channels and stereo receivers will lose their crisp image and sound and the keys on keyboards will stick and not function properly. Only AG SONIC Ultrasonic Cleaning Systems can clean electronics and appliances and restore them to working condition.

An unavoidable fact about our modern world is that electronics surround us. Regardless if it’s in the form of personal computers, cell phones, iPads, electrical appliances, tools, machinery, toys, etc., electronics are everywhere.

Another unavoidable fact is that, with use, electronics get very dirty. Dirt and other contaminants are more than an inconvenience. If not cleaned properly, dirt on electronic components can cause the device to:

• Overheat and start fires.
• Short circuit and injure people.
• Malfunction causing loss of valuable data.
• Spread disease through the use of infected keyboards, cell phones, touch screens and other devices.

In order to protect users, preserve data and keep society running smoothly, it’s very important for electronics of all types to not just be regularly cleaned, but cleaned thoroughly.

Packing:

1 x ultrasonic cleaner

1 x SUS basket

1 x SUS lid

1 x power cord

1 x English instruction manual

Specifications:

But How Do You Thoroughly Clean Electronics?

Most people simply wipe the outside of the device or use a vacuum to suck (or compressed air to blow) away dust. Unfortunately, these methods are simply not enough. With each method, large amounts of dirt are left in the tiny crevices under buttons, around computer chips, between wires and other components. Additionally, these methods only clean what is easily visible which is just a small fraction of what needs to be cleaned, and do little to eliminate oils, viruses and bacteria, etc.

FAQ:
Q:What are the advantages of AGsonic ultrasonic cleaner over traditional cleaning methods?
A:1.minimize the use of manual labor
· 2.make cleaning and degreasing without the use of organic solvents
· 3.clean hard to reach areas of products and remove all types of dirt
·4.shorten the processes such as extraction, dispersion, purification, chemical reactions
·5. eliminates costly mechanical and chemical cleaning of heat exchangers

Q: What frequency is better for my parts?
A: Frequency is suggested based on pollutants in the objects.
28kHz frequency is stronger, better for car/motor/truckessel parts clean (remove oils, grease, pastes, etc. )
40kHz is better for pcb boards, electronic parts, etc.
Higher precision goods, higher frequency.

Q: Can ultrasonic cleaning damage parts?
A: Although the effect of thousands of implosions per second is very powerful, the cleaning process is safe. No damage to your daily objects.