Active Member
|
[China]
Address: Room 804, C6 Building,No.52 Bay Valley Technology Center, Lane 1688 North Guoquan Road, Yangpu District, Shanghai, China
Contact name:Lily Liu
Shanghai Flexem Technology Co.,Ltd |
|
|
* Programming Language: Ladder diagram/standard C program (both can be used).
* Communication Protocol: RS232 x1, RS485 x1, Supporting Mitshubish FX2N and Modbus RTU communication.
* Programming Port: USB connection.
* High-speed Interrupt: X0-X5 rising and falling edge interruption, 3-way timing interruption.
| Programming Language | Ladder Diagram/standard C Program (both Can Be Used) |
| Input Power | DC 24V,Input Range:DC 18V～32V |
| Power Down Allowed | < 5mS |
| Communication Protocol | RS232 X1, RS485 X1, Supporting Mitshubish FX2N And Modbus RTU Communication |
| Power Consumption | 4W |
| Operating Temperature | -20～70°C |
| PORT1/PORT2 | ||
| Pin1 | Rx-(B) (PORT2 RS485) |  |
| Pin2 | RxD (PORT1 RS232) | |
| Pin3 | TxD (PORT1 RS232) | |
| Pin4 | NA | |
| Pin5 | GND | |
| Pin6 | Rx+(A) (PORT2 RS485) | |
| Pin7 | NA | |
| Pin8 | NA | |
| Pin9 | NA | |
