Active Member
|
[China]
Address: Daqiao Industrial Zone, Baixiang Town,Yueqing 325603,Zhejiang, China
Contact name:Jessica
Zhejiang KRIPAL Electric Co., Ltd. |
|
|
2 Pole 4 Pole 32 Amp Rotary Isolator Switch for Disconnector Power
Description:
UKG1 is ON-Off switches to isolate the power to a particular area of operation. According to IEC/EN60204 or VDE01l3. all electrical equipments of industrial machines must be equipped with a Main Switch. This must permit disconnection of all the electrical equipment during cleaning. maintenance and repair work. and other extended periods, when is stationary.
Specifications:
| Electrical characteristics of the standard EN 60947-3 | 12 | 16 | 20 | 25 | 32 | 40 | ||||||||
| Rated operating voltage Ue | V | 690 | 690 | 690 | 690 | 690 | 690 | |||||||
| Rated insulation voltage Ui | V | 690 | 690 | 690 | 690 | 690 | 690 | |||||||
| Rated impulse withstand voltage Uimp | kV | 4 | 4 | 4 | 6 | 6 | 6 | |||||||
| Conventional thermal current Ith | A | 12 | 16 | 20 | 32 | 40 | 50 | |||||||
| Conventional enclosed thermal current | A | 12 | 16 | 20 | 25 | 32 | 40 | |||||||
| Frequency | Hz | 50/60 | 50/60 | 50/60 | 50/60 | 50/60 | 50/60 | |||||||
| AC-21ALight-overload | 690V | A | 12 | 16 | 20 | 25 | 32 | 40 | ||||||
| Switching load | ||||||||||||||
| AC-22AMixed light overload switch | 690V | A | 12 | 16 | 20 | 25 | 32 | 40 | ||||||
| Load and inductive load | ||||||||||||||
| Single phase-2P | 110V | A/kW | 12/1, 1 | 14/1, 5 | 18/2 | 20/1, 5 | 25/2, 2 | 35/3 | ||||||
| 230V | A/kW | 12/2, 2 | 14/3 | 18/4 | 25/4 | 30/5, 5 | 35/6, 5 | |||||||
| AC-23A | 230V | A/kW | 10/3 | 13/4 | 16/5 | 25/7, 5 | 30/9 | 35/11 | ||||||
| Driven periodically switch 3PH | 400V | A/kW | 10/5, 5 | 13/7, 5 | 16/9 | 22/11 | 27/15 | 32/18, 5 | ||||||
| 500V | A/kW | 10/7, 5 | 14/10 | 16/11 | 22/15 | 27/18, 5 | 32/22 | |||||||
| 690V | A/kW | 10/7, 5 | 14/10 | 16/12, 5 | 16/15 | 20/18, 5 | 25/22 | |||||||
| Single phase-2P | 110V | A/kW | 10/0, 75 | 12/11 | 16/1, 5 | 16/1, 1 | 20/1, 5 | 30/2, 5 | ||||||
| 230V | A/kW | 10/2 | 12/2, 2 | 16/3, 5 | 20/3, 7 | 25/4 | 30/5, 5 | |||||||
| AC-3squirrel cage motor starting | 230V | A/kW | 8/2, 2 | 10/3 | 12/4 | 18/5, 5 | 23/7, 5 | 27/9 | ||||||
| (Running in the process of interruption) Three phase-3P | 400V | A/kW | 8/4 | 10/5 | 10/6 | 16/7, 5 | 20/11 | 27/15 | ||||||
| 500V | A/kW | 8/5 | 10/7, 5 | 12/8 | 16/11 | 20/15 | 27/18, 5 | |||||||
| 690V | A/kW | 6/5, 5 | 8/7, 5 | 10/9 | 12/11 | 16/15 | 20/18, 5 | |||||||
Features:
• Safety switches are always housed in insulated enclosures and have an inscription saying "Safety Switch" on a bright orange label.
• Switches to be used for emergency stop switching have a red handle and yellow locking collar in accordance with STOP category O (as per IEC/EN 60204/VDE 0113).
• If the switch is not approved for emergency stop switching, both parts will be black ("SW" part no. suffix).
• The cover and handle are interlocked by fitting a padlock.
Normal Working Conditions:
1. The ambient air temperature does not exceed +40º C, the average temperature within 24 hours and not more than +35º C.
2. The ambient air temperature is not lower than -5º C.
3. Installation site altitude does not exceed 2000m.
4. The relative humidity of the air no more than 50% when the maximum temperature is +40º C and at a lower temperature allows a higher relative humidity, such as when temperature is 20º C the relative humidity reach 90%. To condensation occasionally due to temperature changes should take special measures.
About Us:
Our products are designed and tested to meet a wide range of applications and to operate under even the most extreme conditions.
We aim to solve our customers’ problems through expertise and co-operation.
We are a reliable partner for our customers and partners - and accurate and prompt in our deliveries.
