Active Member
|
[China]
Address: Room 703, Land Center T2, YanZhan Road, No.1111, QuJiang New District, Xi'an China
Contact name:Rachel Zhang
Xi'an Longjoy Foreign Trade Co.,Ltd |
|
|
HDPE butt elbow is made of polyethylene plastic, PE is a basic plastic material, plastic bags, plastic film are PE products. HDPE is a high crystallinity, non-polar thermoplastic resin. The appearance of the original HDPE is milky white and translucent to a certain extent in the thin section. HDPE has excellent resistance to most domestic and industrial chemicals.
HDPE specification HDPE butt elbow technical data sheet as below:
| Performance | Company | Requirement | Test parameters | Test method |
| Hydrostatic strength | MPa | GBAT6111-2003 | ||
| Material level | ||||
| PE63 | PE80 | PE100 | ||
| 20°C (100h) Circumferential stress: no fracture, no permeability | 8 | 9 | 12.4 | |
| 80°C (100h) Circumferential stress: no fracture, no permeability | 3.5 | 4.6 | 5.5 | |
| 100°C (100h) Circumferential stress: no fracture, no permeability | 3.2 | 4 | 5 | |
| elongation at break | % | >350 | GBAT8804.3-2003 | |
| Thermal stability (oxidation induction time) | min | > | 200°C | GBfT17391 1988 |
| Melt mass flow rate | G/10min | MFR change before and after processing < 25% | 190°C, 5kg | GBAT3682-2000 |
| Vertical retraction rate | % | <3 | 110°C | GBfT6671-2001 |
| Withstand voltage performance | MPa | 80 ° C hydrostatic strength (165h), no fracture, no leakage | After the cumulative acceptance of aging energy ≥ 5GJ/m² | GBAT3681 |
| density | G/cm³ | 0.930-0.960 | 23°C | GBAT1033-1986 |
Specification:
| Product Name: HDPE pipe fittings | |||||
| Product material: HDPE | |||||
| Specification: DN20 / 25 / 32 / 40 / 50 / 63 | |||||
| Scope of application: widely used in drinking water pipe, industrial pipe system, heating pipe system, home decoration, building drainage, civil engineering, etc | |||||
Standard:ANSI,ASME,DIN
Application:Chemical,pipeline
Size:20/25/32/40/50/63/75/90/110
HDPE butt elbow is divided into medium density polyethylene elbow and high density polyethylene elbow. According to the wall thickness, it can be divided into sdr11 and sdr17.6 series. The former is suitable for transporting artificial gas, natural gas and liquefied petroleum gas, while the latter is mainly used for transporting natural gas. Compared with the steel pipe, the construction technology is simple and has certain flexibility. What's more, it doesn't need anti-corrosion treatment, which will save a lot of working procedures. The disadvantage is that the equipment is not as good as steel pipe. In the construction, special attention should be paid to the safety distance of thermal heating, and it should not be exposed to the air and sunlight, and it is sensitive to chemicals, so as to prevent the leakage of sewage pipe from causing damage.
a. Plastic bubble bag package b.Wove bag package c.Pallet d. Customized.
Our Steel flat factory have high ability for production, the delivery time is 30 days for small quantity, or if you are hurry for that, we can arrange and meet your shipping date.
