Anping Tiantai Metal Products Co., Ltd. |
Verified Suppliers
|
|
Hot dip galvanized steel korean standard platforms carbon steel trench cover industry grating
Steel Bar Grating
Steel Grating Mesh is made by welding with flat steel and bars with certain distances. It goes through cutting, opening, edging and other processes.
1. Description
(1) Structure: Welding with flat steel and cross/round bars with certain distances.
(2) Features: High strength, light structure, high bearing.
(3) Surface: The hot dipped zinc coating gives the product excellent anti-corrosion.
Steel Grating Type
1.Plain type:
One of the most wiely used gratings, available for flooring,
sidewalk, dranage pit cover, stair tread, etc
2.Serrated type:
Better Non-skid property & safety compared with plain grating
3.I-shape type
Lighter, more economical and practical comparing with plain grating
1.Stainless steel steel grating:The use of treads is very
extensive. It is widely used in factories such as power plants and
water plants, platform walkways in municipal engineering and
sanitation engineering, and large-scale ground platforms such as
theaters, visiting platforms and parking lots. The installation of
the tread plate is very simple, does not require complicated
installation; ventilation, lighting, heat dissipation,
explosion-proof, anti-slip performance; high strength of the tread
plate, light structure, durable; maintenance is very simple,
anti-dirt.
2.Platform steel grating:Many chemical plants have a large number
of operating platforms. For reasons, steel gratings are used as
paving materials to create an operating platform that is
corrosion-resistant, paint-free, and requires no containment and
long service life.
Product name | *Steel grating |
Material | *Mild steel (Carbon steel) *stainless steel 304, SS316 |
Material standard | *USA:ASTM A36 *UK:BS4360 *Australia:AS3679 *China:Q235 |
Bearing bar type | *Smooth/flat bar *serrated/toothed bar *Smooth I bar *Serrated I bar |
Bearing bar thickness | *2mm to 10mm, 3mm and 5mm recommended |
Bearing bar pitch | *12.5-30mm/40mm/50mm/60mm/80mm/90up,30and40mm recommended |
Bearing bar specification | *flat bar and serrated bar 20*3,20*5,25*3,25*5,30*3,30*4,30*5,32*3,32*5,35*3,35*5,40*3,40*5, 45*5,50*3,50*5,55*5,60*5,65*5,70*6,75*6,75*8,80*8,90*8,100*8, 120*8,130*8,150*8 *I-section bar 25*5*3,32*5*3,38*5*3,44*5*3,50*5*3,50*7*4,55*7*4,60*7*4, 65*7*4,75*7*4 |
Cross bar | *5*5mm,6*6mm,8*8mm |
Cross bar pitch | *30mm,38mm,50mm,76mm,100mm,50mm and 100mm recommended |
Surface treatment | *Hot dipped galvanized *Untreated(self-color) *Painted |
HDG standard | *ASTM A123 *BS729 *AS1650 |
Grating Standard | *AS1657-2013 *BS4592-2006 *ANSI/NAAMM(MBG531-88) |